User Guide

ASUS A7S8X-MXASUS A7S8X-MX

ASUS A7S8X-MX

2-332-33

2-33

Boot Up Floppy Seek [Disabled]Boot Up Floppy Seek [Disabled]

Boot Up Floppy Seek [Disabled]

When [Enabled], the BIOS will seek the flopy disk drive to determine

whether the drive has 40 or 80 tracks. Configuration options: [Disabled]

[Enabled]

Boot Up Num-Lock [On]Boot Up Num-Lock [On]

Boot Up Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

OS Select for DRAM > 64MB [Non-OS2]OS Select for DRAM > 64MB [Non-OS2]

OS Select for DRAM > 64MB [Non-OS2]

Select [OS2] only when you are using an OS2 operating system with

greater than 64MB RAM; otherwise, set to [Non-OS2].

Configuration options: [Non-OS2] [OS2]

Full Screen Logo [Enabled]Full Screen Logo [Enabled]

Full Screen Logo [Enabled]

Allows you to enable or disable the full screen logo display feature.

Configuration options: [Disabled] [Enabled]

Halt On [All, But Keyboard]Halt On [All, But Keyboard]

Halt On [All, But Keyboard]

Sets the system to halt on errors according to the system functions

specified in each option. Configuration options: [All Errors] [No Errors]

[All, But Keyboard] [All , But Diskette] [All, But Disk/Key]

Set this item to [Enabled] to use the ASUS MyLogo™ feature.