User Guide

2-18 Chapter 2: BIOS Setup
2.4.3 Onboard Devices Configuration
Configure ITE8712 Super IO Chipset
OnBoard Floppy Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
OnBoard Game Port [Disabled]
OnBoard MIDI Port [Disabled]
OnBoard Giga LAN [Enabled]
Allows you to enable or disable the onboard Gigabit LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard Giga LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard Gigabit LAN boot ROM.
Configuration options: [Disabled] [Enabled]
VIA SATA BOOTROM [Enabled]
Allows you to enable or disable the VIA Serial ATA boot ROM.
Configuration options: [Disabled] [Enabled]
OnBoard AC’97 Audio [Enabled]
Enables or disables the onboard AC’97 Audio controller.
Configuration options: [Disabled] [Enabled]
OnBoard Floppy Controller [Enabled]
Allows you to enable or disable the onboard floppy controller.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. This item appears only when the
Parallel Port Address is not Disabled.
Configuration options: [Normal] [EPP] [ECP] [EPP+ECP]