Instruction Manual

ASUS A7VI-VM User’s Manual 17
3. HARDWARE SETUP
1) Jumper Setting (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Jumper Setting JEN
JumperFree™ [2-3] (default)
Jumper Mode [1-2]
In JumperFree™ mode, DIP switches (SW1) must be set as shown:
(ON: 1,2,4; OFF: 3)
A7VI-VM JumperFree™ Mode Setting
Jumper Mode JumperFree
21
JEN
3
2
DSW
A7VI-VM
®
ON
12
34
Motherboard Features Settings (DIP Switches - SW1)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
A7VI-VM DIP Switches
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
ON OFF
DSW
ON
12
34
A7VI-VM
®
ON
12
34
3. H/W SETUP
Motherboard Settings
(default)