Installation guide

ASUSTOR NAS Quick Installation Guide
4.3 Installation Using the LCD Display
• The LCD display will ask you whether or not you want initialize the NAS once it has detected
that the NAS has not yet started to initialize.
• Please use the "↵” button found on the right side of the LCD display to confirm that you want
to initialize the NAS. The system will now start the initialization process.
• Initialization is complete when the NAS’s IP address is shown on the LCD display. NOTE:
The password for the “admin” account will be set to “admin”.
• This installation method is only suitable for use on models with LCD Displays (AS5104T,
AS5108T and AS5110T).
4.4 Installation Using a Direct Connection
Please see section 5.4 Troubleshooting for installation instructions.
Page 18 of 23