User's Manual
Table Of Contents
2-30
Chapter 2: UEFI BIOS 設定
2.8.7 Setup Mode [EZ Mode]
[Advanced Mode] UEFI BIOS Utility起動時の初期画面として、Advanced Mode を表示します。
[EZ Mode] UEFI BIOS Utility起動時の初期画面として、EZ Mode を表示します。
2.8.8 CSM (Compatibility Support Module)
CSM (Compatibility Support Module) のパラメータ設定です。この設定によってUEFIドライバーを持た
ないデバイスとの互換性を向上することが可能です。
Launch CSM [Enabled]
[Auto] システムは自動的に起動可能デバイスと追加デバイスを検出します。
[Enabled] CSMを有効にし、Windows® UEFIモード、またはUEFIドライバーを持たない追加デバ
イスを完全にサポートし互換性を高めます。
[Disabled] Security Firmware UpdateとSecure Bootを完全にサポートするためにCSMを無効に
します。
次の項目は、「Launch CSM」を [ Enabled] に設定することで表示されます。
Boot Device Control [UEFI and Legacy OpROM]
起動を許可するデバイスタイプを選択します。
設定オプション: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]
Boot from Network Devices [Legacy OpROM rst]
起動に使用するネットワークデバイスの優先タイプを選択します。起動時間を短縮する場合は [Ignore]
を選 択します。
設定オプション: [Legacy OpROM rst] [UEFI driver rst] [Ignore]
Boot from Storage Devices [Legacy OpROM rst]
起動に使用するストレージデバイスの優先タイプを選択します。起動時間を短縮する場合は [Ignore]
を選 択します。
設定オプション: [Both, Legacy OpROM rst] [Both, UEFI rst] [Legacy OpROM rst]
[UEFI driver rst] [Ignore]
Boot from PCIe/PCI Expansion Devices [Legacy OpROM rst]
起動に使用するPCI Express/PCI 拡張デバイスの優先タイプを選択します。
設定オプション: [Legacy OpROM rst] [UEFI driver rst]
2.8.9 Secure Boot
システム起動時に許可されていないファームウェア、オペレーティングシステム、UEFIドライバー
(オプションROM)が実行されないようにするWindows® のSecure Bootに関する設定を行うことがで
きま す。
OS Type [Windows UEFI mode]
インストールしているO Sを 選択します。
[Windows UEFI mode] Secure Bootによるチェックを実行します。Windows® UEFIモード、または
Microsoft® Secure Bootに対応するOSの場合はこのオプションを選択します。
[Other OS] 非UEFIモード (従来のモード) 、またはMicrosoft® Secure Bootに非対応なOSの場
合、このオプションを選択することで機能を最適化します。Microsoft® Secure Boot
はWindows® UEFIモードのみをサポートしています。