Manual

AAM6010EV-M ADSL Combo Router User’s Manual
14
Figure 3.5 Hardware Installation Confirmation
Figure 3.6 Hardware Installation
5. You just need to click “Finish” to close the Wizard at the installation complete page (Figure 3.7).
Figure 3.7 Completing the Found New Hardware Wizard
Before you start to access AAM6000EV-M via Ethernet or USB, you have to configure your PC TCP/IP
address to be 192.168.1.x, where x could be any number between 3 ~ 254, subnet mask is 255.255.255.0.
Your AAM6000EV-M default IP address is “192.168.1.1”.
3.2.2 Windows® XP PCs:
1. In the Windows task bar, click the Start button, and then click Control Panel.
2. Double-click the Network Connections icon. (Figure 3.8)
3. In the LAN or High-Speed Internet window, right-click on icon corresponding to your network
interface card (NIC) and select Properties. (Often this icon is labeled Local Area Connection).
The Local Area Connection dialog box displays with a list of currently installed network
items.
4. Ensure that the check box to the left of the item labeled Internet Protocol (TCP/IP) is
checked, and click (Figure 3.9)