Manual

AAM6010EV-M ADSL Combo Router User’s Manual

2. In the Control Panel window, double click the Network icon.

3. In the Network dialog box, click the Protocols tab.

The Protocols tab displays a list of currently installed network protocols. If the list includes TCP/IP,

the protocol has already been enabled. Please skip to step 9 directly.

4. If TCP/IP does not display as an installed component, click

5. In the Select Network Protocol dialog box, select TCP/IP, and then click

You may be prompted to install files from your Windows NT installation CD or other media. Follow

the instructions to install the files.

After all files are installed, a window displays to inform you that a TCP/IP service called DHCP can

be set up to dynamically assign IP information.

6. Click

to continue, and then click if prompted to restart your computer.

7. After restarting your PC, open the Control Panel window, and then double-click the Network

icon.

8. In the Network dialog box, click the Protocols tab.

9. In the Protocols tab, select TCP/IP, and then click

10. In the Microsoft TCP/IP Properties dialog box, click the radio button labeled Use the

following IP address and type 192.168.1.x and 255.255.255.0 in the IP address field and

Subnet Mask field, respectively.

11. Click

twice to confirm and save your changes, and then close the Control Panel.

3.2.7 Assigning IP to your PC automatically by DHCP

In some cases, you may want to adapt AAM6000EV-M’s DHCP feature (it’s only available in router

mode) to your PC, you just click the radio button labeled Obtain an IP address automatically instead

of Use the following IP address in above steps.

f By default, the LAN port IP address of AAM6000EV-M is assigned as: 192.168.1.1. (You can

change this number, or another number can be assigned by your ISP. See Chapter 6 for more

information.)

Note

Your PC must have IP addresses that place them in the same

subnet as the AAM6000EV-M’s LAN port. If you manually assign IP

information to your AAM6000EV-M, you can follow the instructions

in section “6.2 LAN” to change the LAN port IP address accordingly.

3.3 Login to your AAM6000EV-M

In this section, you can login to the AAM6000EV-M’s Web page, either by an Ethernet or a USB cable, and

start to configure settings and observe some statistics of your Internet connection.

1. Open your Web browser, and type the following URL in the address/location box, and press

<Enter>:

http://192.168.1.1

This is the predefined IP address for the LAN port on the AAM6000EV-M.

A login screen displays, as shown in Figure 3.11