User Guide

AAM6020VI-T4 User Manual
2
2
Table of Contents
1. Introduction 4
1.1 Features & System Requirements 4
2. Your CPE at a glance 5
2.1 Ports and buttons (Back panel) 5
2.2 LED description (Front panel) 5
2.3 LED table & parts list 6
3. Getting Start 7
3.1 Connecting the Hardware 7
3.1.1 Connect the ADSL line 7
3.1.2 Connect the computers or a LAN 7
3.1.3 Attach the power adapter 7
3.1.4 Turn on your computer 7
3.2 Configuring Your PC 8
3.2.1 Windows XP 8
3.2.2 Windows 2000 8
3.2.3 Windows Me 9
3.2.4 Windows 95/98 10
3.2.5 Windows NT 4.0 11
3.2.6 Assigning IP to your PC automatically by DHCP 11
4. Setting up your CPE 12
4.1 Log into your CPE 12
4.2 Home screen 12
4.3 Setup 13
4.3.1 Wide Area Network connection 13
4.3.2 Local Area Network connection 14
4.4 Configuring the WAN 14
4.4.1 New Connection 14
4.4.2 Modify an Existing Connection 19
4.4.3 Modem setup 19
4.5 Configuring the LAN 19
4.5.1 Enable/Disable DHCP 19
4.5.2 Changing the CPEs IP address 21
4.5.3 Firewall/NAT Services 22
4.6 Advanced 22
4.6.1 UPnP 23
4.6.2 Port Forwarding 24
4.6.3 IP QoS/IP filters 25
4.6.4 Access Control 26
4.6.5 LAN clients 26
4.6.6 Bridge Filters 26
4.6.7 Multicast 27
4.6.8 Static Routing 28
4.6.9 Dynamic Routing 29
4.7 Wireless 31
4.7.1 Setup 31