User Manual
12
AI accelerator card
2.1 Before you proceed
Take note of the following precautions before you install the AI accelerator
card or change any settings.
WARNING!
• Unplug the power cord from the wall socket before touching any
component.
• Before handling components, use a grounded wrist strap or touch
a safely grounded object or a metal object, such as the power
supply case, to avoid damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
• Before you install or remove any component, ensure that the ATX
power supply is switched o or the power cord is detached from
the power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, or components.
• We do not recommend removing or changing the M.2, doing so
may cause damage to your AI accelerator card or M.2.