Quick Start Guide

7
English
4
A message is displayed when
synchronization is completed.
5
Congratulations! You will nd the pages below show
up when an AiMesh node has been successfully added
to the AiMesh network.
TROUBLESHOOTING
If your AiMesh router cannot find any AiMesh node nearby or synchronization
fails, please check followings and try again.
a
Move your AiMesh node closer to the AiMesh router ideally. Ensure it is within 1-3 meters.
b
Your AiMesh node is powered on.
c
Your AiMesh node is upgraded to AiMesh supported rmware.
i
Download AiMesh - supported reware at: https://www.asus.com/AiMesh/
ii
Power on your AiMesh node and connect it to your PC via a network cable.
iii
Launch a web GUI. You will be redirected to the ASUS Setup Wizard. If not,
navigate to http://router.asus.com
iv
Go to Administration > Firmware Upgrade. Click on Choose File, and upload
the AiMesh-supported rmware.