User manual

WL-AM604g 11g WiFi ADSL Router User Manual
25
LINKAP ACT
xDSL LAN
4 3 2 1
!
3. Setting IP address
Click
Advanced Setup -> LAN
. Set the WL-AM604g
IP address
to
192.168.1.1
, select
Enable DHCP Server
, and set
Start IP address
to
192.168.1.4
. Click S
ave/ Reboot
.
4. Setting WDS
Click
Wireless -> Wireless Bridge
. Select
Wireless Bridge.
You can select
Enabled(Scan)
to nd WL-500gD and WL-500gP. If the stations are on the list, check
the checkbox and click
Save/Apply
.
If you cannot nd WL-500gD by scanning, set
Bridge Restrict
to
Enable
and key in the
MAC address of WL-500gD and WL-500gP manually. When nished, click
Save/Apply
.
WL-AM604g WDS setup is complete!