User manual

WL-AM604g 11g WiFi ADSL Router User Manual
28
LINKAP ACT
xDSL LAN
4 3 2 1
!
This chapter shows how to congure other advanced router features of WL-AM604g.
WAN
Click
Advanced Setup -> WAN
in the navigation menu to enter the WAN setup page.
This page allows you to edit the WAN settings.
LAN
1. Click
Advanced Setup -> LAN
in the navigation menu to enter the
Local Area
Network (LAN) Setup
page. This page allows to change the IP address and subnet
mask of the router, enables or disables UPnP, IGMP snooping, and DHCP server.
The default settings are:
•
IP Address:
192.168.1.1
•
Subnet mask:
255.255.255.0
•
Enable UPnP:
Yes
•
Enable IGMP Snooping:
No
•
Enable DHCP Server:
Yes
Start IP Address:
192.168.1.2
End IP Address:
192.168.1.254
Lease Time (hour):
24
By default, DHCP server is enabled. The DHCP server enables you to assign the
addresses for to the LAN computers.
2. Press
Save
to save the congurations and go on setting up the other features. If all
settings are complete, press
Save/ Reboot
to apply the settings and reboot WL-
AM604g.
Advanced settings