User manual

WL-AM604g 11g WiFi ADSL Router User Manual
31
LINKAP ACT
xDSL LAN
4 3 2 1
!
This chapter describes how to maintain your WL-AM604g wireless ADSL router.
Conguration backup
You can backup the conguration le and store it on your computer. Click
Management
-> Settings
to open the configuration page and click the
Backup Settings
button.
Click
Save
and define the destination folder. The default name for backup file is
backupsettings.conf
.
Management
Restore settings from a backup le
You can restore the settings from a backup le when you reset the wireless router to
factory default. Click
Management -> Settings -> Update
to open the conguration
page. Click
Browse...
to locate the backup le on your computer, then click
Update
Settings
button to proceed. When restoring is completed, the wireless router reboots.
The whole process takes about 80 seconds.
Restore to factory default settings
To clear all settings and restore to the factory default settings, do either of the following:
• Press the
Reset
button on the rear panel of the wireless router for ten seconds.
• Click
Management -> Settings -> Restore Default
to open the configuration
page and click the
Restore Default Settings
button.