Installation Guide

RAID configuration and driver installationRAID configuration and driver installation

RAID configuration and driver installation

2929

6. When prompted, use the arrow keys to select the source disk, then

press <Enter>.

7. When prompted to start the duplication process, press <Y> to

continue; otherwise, press <N> to abort the operation.

8. After you have created the RAID 1 set, press any key to reboot the system.

During POST, the FastTrak S150 TX4™ BIOS checks and displays the

disk array information.

9. Use the FDISK utility to format the array as a single hard drive.

10. After you have formatted the arrayed drives, install an operating

system (OS). The OS will treat the RAID 1 array as a single drive unit.