Installation Guide

RAID configuration and RAID configuration and

RAID configuration and

driver installationdriver installation

driver installation

1.51.5

1.5

Adaptec RAID Configuration UtilityAdaptec RAID Configuration Utility

Adaptec RAID Configuration Utility

The Adaptec RAID Configuration Utility allows you to create RAID 0 and

RAID 1 set(s) from SATA hard disk drives connected to the SATA

connectors supported by the motherboard Southbridge chip.

To enter the Adaptec RAID Configuration Utility:

1. Turn on the system after installing all the SATA hard disk drives.

2. During POST, the Adaptec HostRAID™ technology automatically

detects the installed SATA hard disk drives and displays any existing

RAID set(s). Press <Ctrl> <A> to enter the utility.

The

Array Configuration Utility Array Configuration Utility

Array Configuration Utility menu lets you create and

manage RAID sets. The

Disk Utilities Disk Utilities

Disk Utilities allows you to check and verify

SATA hard disk drives.

At the bottom of the screen is the legend box. The keys on the

legend box allow you to navigate through the setup menu options or

execute commands. The keys on the legend box vary according to the

menu level.

3. Use the arrow keys to highlight an option.