Installation Guide

RAID configuration and driver installationRAID configuration and driver installation

RAID configuration and driver installation

1.5.11.5.1

1.5.1

Creating a RAID 0 set (Striped)Creating a RAID 0 set (Striped)

Creating a RAID 0 set (Striped)

To create a RAID 0 set:

1. From the Adaptec RAID Configuration Utility initial menu, highlight

Array Configuration UtilityArray Configuration Utility

Array Configuration Utility, then press <Enter>.

2. From the Main Menu, select

Create ArrayCreate Array

Create Array, then press <Enter>.

3. Select the first drive you want to add to the array, then press

<Insert>. The selected drive appears in the

Selected DrivesSelected Drives

Selected Drives

section.

A RAID 0 set requires two identical hard disk drives.