Owner manual

ASUS AP1600R-E2 (AA2/AI2)ASUS AP1600R-E2 (AA2/AI2)
ASUS AP1600R-E2 (AA2/AI2)ASUS AP1600R-E2 (AA2/AI2)
ASUS AP1600R-E2 (AA2/AI2)
5-355-35
5-355-35
5-35
Video Off Method [DPMS]Video Off Method [DPMS]
Video Off Method [DPMS]Video Off Method [DPMS]
Video Off Method [DPMS]
This item determines the video off features. The Display Power
Management System (DPMS) feature allows the BIOS to control the video
display card if it supports the DPMS feature. [Blank Screen] only blanks the
screen. Use this for monitors without power management or “green”
features. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS]
Video Off In Suspend [Yes]Video Off In Suspend [Yes]
Video Off In Suspend [Yes]Video Off In Suspend [Yes]
Video Off In Suspend [Yes]
This item determines when to activate the video off feature for monitor
power management. Configuration options: [No] [Yes]
MODEM Use IRQ [3]MODEM Use IRQ [3]
MODEM Use IRQ [3]MODEM Use IRQ [3]
MODEM Use IRQ [3]
Allows you to select the IRQ assignment for the modem.
Configuration options: [NA] [3] [4] [5] [7] [9] [10] [11]
Soft-Off by PWR-BTN [Instant-Off]Soft-Off by PWR-BTN [Instant-Off]
Soft-Off by PWR-BTN [Instant-Off]Soft-Off by PWR-BTN [Instant-Off]
Soft-Off by PWR-BTN [Instant-Off]
When set to [Instant-Off], the system goes to soft off when you press the
power button for
less less
less less
less than 4 seconds. When set to [Delay 4 Sec], press
the power button for
more more
more more
more than 4 seconds to power off the system.
Configuration options: [Instant-Off] [Delay 4 Sec.]
Power On By PCI Devices [Enabled]Power On By PCI Devices [Enabled]
Power On By PCI Devices [Enabled]Power On By PCI Devices [Enabled]
Power On By PCI Devices [Enabled]
Allows you to enable or disable the PME to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
Power On By External Modem [Disabled]Power On By External Modem [Disabled]
Power On By External Modem [Disabled]Power On By External Modem [Disabled]
Power On By External Modem [Disabled]
Allows you to enable or disable system power up when the external modem
receives a call while in soft-off mode.
Configuration options: [Disabled] [Enabled]
Power On Function [BUTTON ONLY]Power On Function [BUTTON ONLY]
Power On Function [BUTTON ONLY]Power On Function [BUTTON ONLY]
Power On Function [BUTTON ONLY]
Allows you to select a device to turn the system power on.
Configuration options: [Password] [Hot Key] [Any KEY] [BUTTON ONLY]
[PS/2 Mouse]
KB Power On Password [Enter]KB Power On Password [Enter]
KB Power On Password [Enter]KB Power On Password [Enter]
KB Power On Password [Enter]
Allows you to set a password to turn the system power on. Highlight this
item then press enter to set a password.
To configure this item, you should set the
Power On FunctionPower On Function
Power On FunctionPower On Function
Power On Function item
to [Password].