Server User Manual

ASUS AP1600R-E2 (BA2)ASUS AP1600R-E2 (BA2)

ASUS AP1600R-E2 (BA2)

4-54-5

4-5

3.3.

USB device wake-up (3-pin USBPW12, USBPW34)USB device wake-up (3-pin USBPW12, USBPW34)

USB device wake-up (3-pin USBPW12, USBPW34)

Set these jumpers to +5V to wake up the computer from S1 sleep

mode (CPU stopped, DRAM refreshed, system running in low power

mode) using the connected USB devices. Set to +5VSB to wake up

from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh,

power supply in reduced power mode).

• The USB device wake-up feature requires a power supply that can

provide 500mA on the +5VSB lead for each USB port; otherwise, the

system would not power up.

• The total current consumed must NOT exceed the power supply

capability (+5VSB) whether under normal condition or in sleep mode.

2.2.

VGA Graphics controller setting (3-pin VGA_EN1)VGA Graphics controller setting (3-pin VGA_EN1)

VGA Graphics controller setting (3-pin VGA_EN1)

These jumpers allow you to enable or disable the onboard ATI Rage XL

video graphics controller. Set to pins 1-2 to enable the video graphics

controller.

NCLV-D

NCLV-D VGA Setting

VGA_EN1

Enable

(Default)

Disable

NCLV-D

NCLV-D USB device wake-up

USBPW12

(Default)

+5V +5VSB

USBPW34

(Default)

+5V +5VSB