User Guide

2-7 ASUS AP2400R-E1 2U barebone server
2.1.6 Installing the air duct
To install the air duct:
1. Take note of the parts of the air duct that should match specific
locations inside the chassis.
2. Position the air duct inside the
chassis with the plastic clips
matching the two vertical metal
strips on the fan cage.
3. Check the rubber pads
underneath the air duct and
ensure that they are in place;
otherwise, the air duct will not fit
properly.
4. Fit the other end of the air duct making sure that no power cable is
strayed under it.
Plastic clips to grip
the metal strips on the
fan cage
Flat rubber pads should match
the top of the two heatsinks
Vertical rubber pads
should fit the spaces
between the two
heatsinks
Metal strips to fit the plastic
clips on the air duct
CPU heatsinks
Be careful not to pull off or break any cables while installing the air
duct.