User guide

6-12
Chapter 6: RAID conguration
6.3 Intel
®
Rapid Storage Technology enterprise (Windows
®
only)
The Intel
®
Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID 10
(RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial
ATA connectors supported by the Southbridge.
You can click Rescan to re-scan any attached hard disks.
1. Power on the system to a Windows desktop.
2. Click the
Intel
®
Rapid Storage Technology enterprise icon to display the main menu.
Your storage system is congured for data protection, increased performance and optimal
data storage capacity. You can create additional volumes to further optimize your storage
system.
To enter the Intel
®
Rapid Storage Technology enterprise utility under a Windows operating
system:
You need to manually install the Intel
®
Rapid Storage Technology enterprise utility on a
Windows
®
operating system. Please refer to the installation instructions in Chapter 6.