User guide

Chapter 2: Hardware setup

2-24

2.6 Cable connections

• The bundled system cables are set up before shipping. You do not need to disconnect

these cables unless you will remove pre-installed components to install additional

hardware components.

• Refer to

Chapter 4

for detailed information on the connectors.

Standard cables connected to the motherboard

1. 24-pin ATX power connector (from power supply to motherboard)

2. 8-pin ATX 12V power connector (from power supply to motherboard)

3. System fan and CPU fan connectors (from system fan to motherboard)

4. SATA conectors (system default; from motherboard to SATA devices)

5. USB 2.0 connector (from motherboard to front I/O board)

6. USB 3.0 connector (from motherboard to front I/O board)

7. System panel connectors (from motherboard to front I/O board)