User guide
Chapter 4: Motherboard information
4-16
11. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1)
These connectors are for the ATX power supply plugs. The power supply plugs are
designed to t these connectors in only one orientation. Find the proper orientation and
push down rmly until the connectors completely t.
• Do not forget to connect the 24-pin and 8-pin power plugs or the system will not boot
up.
• Use of a power supply unit (PSU) with a higher power output is recommended when
conguring a system with more power-consuming devices. The system may become
unstable or may not boot up if power is inadequate.
• This motherboard supports ATX2.0 PSU or later version.
• Ensure that your PSU can provide at least the minimum power required by your
system.
10. 4-pin power connector (4-pin PWR3)
This 4-pin connector provides 5V to an installed SATA DOM (Disk on Module). You can also use
this 4-pin connector to connect to the PSU to increase power by 12V.