User Manual

4-70
Chapter 4: Redfish Technology Pack
4.3.23 Power
This resource shall be used to represent a power metrics resource for a Redfish implementation.
A. GET
• Request
https://{{ip}}/redfish/v1/Chassis/{{chassis_instance}}/Power
Content-Type: application/json
• Response
The response of the request will be in JSON format. The properties are mentioned in
the following table.
Table 29 Power Properties
Name Type ReadOnly Description
@odata.context String True
Refer to section 4.3.1 ODATA properties.
@odata.id String True
Refer to section 4.3.1 ODATA properties.
@odata.type String True
Refer to section 4.3.1 ODATA properties.
@odata.etag String True
Refer to section 4.3.1 ODATA properties.
Oem Object
Refer to Resource Complex Types under section 4.3.3 Resource.
This property will be a part of JSON response only if an
OEM property is implemented according to “
How to Add
OEM extensions (v1.1)
” document.
Id(M)
String True Resource Identifier.
Name(M)
String True Name of the Resource.
Description String True
Provides description of the resource. Refer to section 4.3.3 Resource.
PowerControl(N) Array False This is the definition for power control function (power reading/limiting).
Refer to Table 30 PowerControl Properties below.
Voltages(N) Array True
This is the definition for voltage sensors. Refer to Table 32 Voltages
Properties below.
PowerSupplies(N) Array False Details of a power supplies associated with this system or device. Refer
to Table 33 PowerSupply Properties below.
Northbound is supported and platform specific porting
needed.
Redundancy(N)(C) Array True Redundancy information for the power subsystem of this system or
device.
Please refer to section
4.4 Redfish AMI OEM Entities
for
Redundancy information that can be configured through
System Builder.
E16160_ASMB9-iKVM_UM_V3.indb 70E16160_ASMB9-iKVM_UM_V3.indb 70 1/17/2020 2:29:29 PM1/17/2020 2:29:29 PM