User Manual

3-2
Chapter 3: Web-based User Interface
3.1 Web-based user interface
The web-based user interface allows you to easily monitor the remote server’s hardware
information including temperatures, fan rotations, voltages, and power. This application also
lets you instantly power on/off or reset the remote server.
To enter the Web-based user interface:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced Menu > Runtime Error Logging > CPU II0 Bridge
Configuration > Launch Storage OpROM, then press <Enter>.
3. Set Launch Storage OpROM to [Enabled].
4. Go to the Server Mgmt Menu > BMC network configuration > Configuration
Address source, then press <Enter>.
5. Enter the IP Address in BMC, Subnet Mask in BMC and Gateway Address in BMC.
6. Press <F10> to save your changes and exit the BIOS Setup.
You should install JRE on remote console first before using web-based management.
You can find
JRE
from the folder
JAVA
of the ASMB9-iKVM support CD. You can also
download JRE from
http://www.oracle.com/technetwork/java/javase/downloads/index.
html
E16160_ASMB9-iKVM_UM_V3.indb 2E16160_ASMB9-iKVM_UM_V3.indb 2 1/17/2020 2:29:22 PM1/17/2020 2:29:22 PM