M Series LCD Monitor User Guide
Contents Notices.......................................................................................................... iii Safety information....................................................................................... iv Care & Cleaning............................................................................................ v Chapter 1: 1.1 Welcome! ..................................................................................... 1-1 1.2 Package contents............................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 1. 2 3 4 5 6 button: • Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD menu is active. • Automatically adjusts the image to its optimized position, clock, and phase by touching this button for 2-4 seconds (for VGA mode only). • Decreases values or moves your selection left/down. • Contrast hotkey 2. 3. MENU button: • 1-2 Turns on the OSD menu. Enacts the selected OSD menu item.
4. • Increases values or moves your selection right/up. • Brightness hotkey • Selects an available input source. button: 5. Power button/power indicator 6. • Turns the monitor on/off. • The color definition of the power indicator is as the below table. 1.3.
M Series (20'' only of D SKU) M Series (20'' only of N SKU) 6 Rear connectors 1-4 1. DC-IN port. This port connects the power cord. 2. VGA port. This 15-pin port is for PC VGA connection. 3. HDMI port. This port is for connection with an HDMI compatible device. 4. Earphone jack. This port is only available when an HDMI cable is connected. 5. Kensington lock slot. 6. DVI port. This port is for PC DVI connection.
2.1 Assembling the monitor arm/base To assemble the monitor arm/base: 1. Have the front of the monitor face down on a table. 2. Place the circular arm on the back of the monitor by aligning the pins on the arm with the slots on the monitor. Use a coin or the like to turn the screw until the circular arm is securely attached to the monitor. Put the screw cover on the screw. 3.
MS Series 2.2 • Adjusting the monitor For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the ML Series monitor’s angle from +20˚ to -5˚ and it allows 20˚ swivel adjustment from either left or right. -5 20 20º 0º 20º It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.3 1.
• To connect the power cord: • a. Connect the power adapter securely to the monitor’s DC input port. b. Connect one end of the power cord to the power adapter and the other end to a power outlet. To connect the VGA/HDMI-DVI cable: • a. Plug one end of the VGA/HDMI-DVI cable to the monitor’s VGA/HDMI port. b. Connect the other end of the VGA/HDMI-DVI cable to your computer's VGA/DVI port. c. Tighten the two screws to secure the VGA/DVI connector.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Tap the MENU button to activate the OSD menu. 2. Ta p , and to navigate through the functions. Highlight the desired function and tap the MENU button to and activate it. If the function selected has a sub-menu, tap again to navigate through the sub-menu functions. Highlight the desired submenu function and tap the MENU button to activate it. 3. Tap 4.
2. Color You can adjust brightness, contrast, sharpness, saturation, position (VGA only), and focus (VGA only) from this menu. • Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function. • • Contrast: the adjusting range is from 0 to 100. activate this function. Saturation: the adjusting range is from 0 to 100. is a hotkey to • Color Temp.: contains four color modes including Cool, Normal, Warm, and User Mode.
4. Input Select In this function, you can select your desired input source. 5. System Setup Allows you to adjust the system. • Splendid Demo Mode: splits the screen into two for Splendid modes comparison. • Volume: the adjusting range is from 0 to 100. • ECO Mode: reduces power consumption. • OSD Setup: * Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. * Adjusts the OSD timeout from 10 to 120 seconds.
3.2 Specifications summary (M Series) Panel Type Panel size Max. Resolution Pixel pitch Brightness (Max.) Contrast Ratio (Typ.) Contrast Ratio (Max.) Viewing angle(H/V) CR>10 Display colors Response time SPLENDID™ Video Enhancement SPLENDID™ selection Auto adjustment Color temperature selection Skin-Tone selection Digital input Analog input Earphone jack Colors Power LED Tilt Swivel Kensington lock AC/DC adaptor input voltage TFT LCD 20" (16:9) wide screen 1600 x 900 1920 x 1080 0.27 mm 0.2768 mm 0.
3.3 Troubleshooting (FAQ) Problem Power LED is not ON The power LED lights amber and there is no screen image Screen image is too light or dark Possible Solution • Tap the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check if the monitor and the computer are in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.4 Resolution Frequency Supported operating modes Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel (MHz) 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 1280 x 1024 1366 x 768 1440 x 900 1600 x 1200 1680 x 1050 31.47 31.47 35.00 37.87 37.50 35.16 37.88 48.08 46.86 49.72 48.36 56.476 60.02 67.50 60.00 63.98 79.98 47.712 55.94 75.00 65.29 70.08 59.94 66.66 72.82 75.00 56.25 60.
