User's Manual

40 ASUS CUSL2-C Black Pearl User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

18) USB Headers (5-pin USB2, 5-pin USB56)

If the USB ports on the back panels are inadequate, two USB headers are avail-

able for two additional USB ports. Connect the 5-pin ribbon cables from the

provided 2-port USB connector set to the two midboard 5-pin USB headers and

mount the USB connector set to an open slot on your chassis.

CUSL2-C BP

CUSL2-C BP USB Headers

USB56

USB2

USBPWR

USBP2-

USBP2+

GND

USBP5+

USBP5-

USBPWR

GND

19) Power Supply Thermal Sensor Connector (2-pin JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor

cable to this connector.

CUSL2-C BP Thermal

Sensor Connector

CUSL2-C BP

JTPWR

Power Supply

Thermal Sensor