User's Manual

ASUS CUSL2-C Black Pearl User’s Manual66
4. BIOS SETUP
4. BIOS SETUP
Slot 1/5, Slot 2, Slot 3, Slot 4, Slot 6 IRQ [Auto]
These fields set how IRQ use is determined for each PCI slot. The default
setting for each field is [Auto], which utilizes auto-routing to determine
IRQ use. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11]
[12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some nonstandard VGA cards, such as graphics accelerators or MPEG video
cards, may not show colors properly. The setting [Enabled] should correct
this problem. Otherwise, leave this on the default setting of [Disabled].
Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave on default setting for best performance vs. stability.
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
Primary VGA BIOS [PCI/AGP]
If your computer has both PCI and AGP VGA controllers, this field allows
you to select which of the controllers will act as your primary graphics
controller. The default, [PCI/AGP], allows your PCI controller to take pre-
cedent when detected. [AGP/PCI] uses the AGP controller as your primary
controller. Configuration options: [PCI/AGP] [AGP/PCI]
4.4.3 PCI Configuration
PCI Configuration
Onboard LAN Boot ROM [Disabled]
Configuration options: [Disabled] [Enabled]