Motherboard M5A97 R2.
E8046 Revised Edition V2 January 2013 Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................................... vi About this guide......................................................................................................... vii M5A97 R2.0 specifications summary........................................................................ ix Package contents.......................................................................................................
2.3.1 2.4 2.5 2.3.2 3.2 3.3 3.4 3.5 Turning off the computer.......................................................................... 2-17 BIOS setup program................................................................................... 3-2 3.2.1 3.2.2 Advanced menu........................................................................................ 3-14 3.5.1 CPU Configuration..................................................................... 3-14 3.5.3 South Bridge....................
4.3 Software information.................................................................................. 4-3 4.3.1 AI Suite II..................................................................................... 4-3 4.3.3 EPU.............................................................................................. 4-8 4.3.2 4.3.4 4.3.5 4.3.6 4.3.7 4.3.8 4.3.9 4.3.10 4.3.11 4.3.12 4.3.13 4.3.14 Chapter 5: 5.1 USB 3.0 Boost.......................................................................
Safety information Electrical safety • • • • • • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • • • • • • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task. . NOTE: Tips and additional information to help you complete a task.
M5A97 R2.0 specifications summary CPU AMD® Socket AM3+ for AMD® FX Series CPU up to 8-core, compatible with AMD® Socket AM3 for AMD® PhenonTM II / AthlonTM II / SempronTM 100 Series processors AMD® 140W CPU Support AMD® Cool ‘n’ QuietTM support Support AM3+ 32nm CPU • Refer to www.asus.com for the AMD® CPU support list Chipset AMD® 970 / SB950 System Bus Up to 4800MT/s; HyperTransportTM 3.0 Memory 4 x DIMMs, Max. 32GB, DDR3 2133 (O.C.
M5A97 R2.0 specifications summary ASUS unique features ASUS Dual Intelligent Processors ASUS EPU - EPU ASUS TPU - Auto Tuning, TurboV ASUS Power Design - 4+2 Phase Power Design ASUS Exclusive Features - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface ASUS Remote GO! ASUS USB 3.0 Boost ASUS Network iControl Front Panel USB 3.
M5A97 R2.0 specifications summary Back Panel I/O ports 1 x PS/2 Keyboard (Purple) 1 x PS/2 Mouse (Green) 1 x Optical S/PDIF output port 1 x LAN (RJ-45) port 6 x USB 2.0/1.1 ports (1 port supports USB BIOS Flashback) 2 x USB 3.0/2.0 ports (blue) 6 audio jacks for 8-channel audio Internal I/O connectors / buttons / switches 3 x USB 2.0/1.1 connectors support additional 6 USB ports 1 x USB 3.0/2.0 connector supports additional 2 USB ports (19 pin) 6 x SATA 6.
Package contents Check your motherboard package for the following items. nual User Ma M5A97 R2.0 ASUS M5A97 R2.0 motherboard Support DVD xii 2 x Serial ATA 6.0 Gb/s cables User Guide 1 x ASUS I/O Shield • If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product specifications may vary with different models.
Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit AMD AM3+ CPU AMD AM3+ compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
xiv
Product introduction 1.1 Special features 1.1.1 Product highlights 1 AMD FX™ / Phenom™ II / Athlon™ II / Sempron™ 100 series CPU support ® This motherboard supports AMD® Socket AM3+ multi-core processors with unique L3 cache and delivers better overclocking capabilities with less power consumption. It features dual-channel DDR3 memory support and accelerates data transfer rate up to 4800MT/s via HyperTransport™ 3.0-based system bus.
1.1.2 ���������������������������������������� DIP (Dual Intelligent Processors) - TPU �������� (TurboV Processing Unit) & EPU (Energy Processing Unit) TPU Unleash your performance with AI Suite II utility. ASUS Auto tuning feature can intelligently optimize the system for fast, yet stable clock speeds, and the TurboV gives you the freedom to adjust CPU frequencies and ratios to optimize performance under varied system conditions.
1.1.4 ASUS Quiet Thermal Solution Fanless Design: heatsink solution The heatsink features a 0-dB thermal solution that offers you a noiseless PC environment. The heatsink design also lowers the temperature of the chipset and power phase area through high efficient heat-exchange.
ASUS EZ Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable floppy disk or an OS-based utility. ASUS MyLogo 2™ Turn your favorite photos into 256-color boot logos to personalize your system. ASUS O.C. Profile The motherboard features the ASUS O.C. Profile that allows you to conveniently store or load multiple BIOS settings.
1.2 Motherboard overview 1.2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them.
1.2.2 Motherboard layout 1 2 3 1 4 22.9cm(9.0in) KBMS CHA_FAN2 CPU_FAN EPU EATX12V CHA_FAN3 5 6 USB3_12 LAN1_USB12 AUDIO EATXPWR MemOK! 2 CHA_FAN1 USB3_34 AMD® 970 DirectKey PCIEX16_1 RTL 8111F 30.5cm(12.
Layout contents Connectors/Jumpers/Slots/LED Page 1. CPU and chassis fan connectors (4-pin CPU_FAN and 4-pin CHA_FAN1/2/3) 1-21 ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) AMD AM3+ CPU socket DDR3 DIMM slots DRAM LED (DRAM_LED) MemOK! switch USB 3.0 connector (20-1 pin USB3_34) DirectKey button SATA 6.
1.2.3 Central Processing Unit (CPU) The motherboard comes with an AM3+/AM3 socket designed for AMD® FX™ Series / Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors. M5A97 R2.0 M5A97 R2.0 CPU socket AM3+ Ensure that all power cables are unplugged before installing the CPU. The AM3+ socket has a different pinout from the 940-pin socket designed for the AMD Opteron processor. Ensure that you use a CPU designed for the AM3+ socket. The CPU fits in only one correct orientation.
Recommended memory configurations Memory configurations M5A97 R2.0 • Memory module with memory frequency higher than 2133 MHz and its corresponding timing or the loaded DRAM OC Profile is not the JEDEC memory standard. The stability and compatibility of these memory modules depend on the CPU’s capabilities and other installed devices. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.
M5A97 R2.0 Motherboard Qualified Vendors Lists (QVL) DDR3-2133 (O.C.) MHz capability Vendors Part No. Size SS/ Chip Chip Timing DS Brand NO. CORSAIR CORSAIR CORSAIR G.SKILL CMT4GX3M2A2133C9(XMP) CMT4GX3M2B2133C9(Ver7.1)(XMP) CMT4GX3M2B2133C9(XMP) F3-17066CL9D-8GBPID(XMP) 4GB ( 2x 2GB ) 4GB ( 2x 2GB ) 4GB ( 2x 2GB ) 8GB ( 2x 4GB ) DS DS DS DS - - 9-10-9-24 9-9-9-24 9-10-9-27 9-9-9-24 DIMM socket support Voltage (Optional) 1 DIMM 2 DIMMs 1.65 • • 1.5 • • 1.5 • • 1.65 • • DDR3-2000 (O.C.
DDR3-1600 MHz capability Timing Voltage DIMM socket support (Optional) 1 DIMM 2 DIMMs 4 DIMMs A-DATA - - • • A-DATA - - • • 8-8-8-24 9-9-9-28 1.55~1.75 1.55~1.75 1.65 • • • • • • • • 9-9-9-27 - • • 9-9-9-27 - • • - - - NO 6-6-6-18 Heat-Sink Package 8-8-8-24 1.65 • • 1.5 • • • 1.65 • • • 1.65 1.5 • • • • • • Part No.
DDR3-1333 MHz capability Chapter 1 Vendors Part No. Size SS/ Chip Brand Chip NO.
DDR3-1333 MHz capability Vendors Part No. Size SS/ Chip Brand Chip NO. DS Timing Voltage Patriot PG38G1333EL(XMP) DS - - - 1.5 Patriot PGD316G1333ELK(XMP) DS - - 9-9-9-24 1.5 • • • Patriot PGS34G1333LLKA DS - - 7-7-7-20 1.
1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1 2 3 M5A97 R2.0 4 5 6 Slot No. 1 2 3 4 5 6 Slot Description PCIe 2.0 x16_1 slot [blue] (at x16 mode) PCIe 2.0 x1_1 slot PCIe 2.0 x1_2 slot PCIe 2.0 x16_2 slot [black] (at x4 mode) PCI 1 PCI 2 Chapter 1 VGA configuration 1-14 PCI Express operating mode PCIe 2.0 x16_1 PCIe 2.
• In single VGA card mode, use the PCIe 2.0 x16_1 slot (navy blue) for a PCI Express x16 graphics card to get better performance. • We recommend that you provide sufficient power when running CrossFireX™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2/3 when using multiple graphics cards for better thermal environment. IRQ assignments for this motherboard PCIe x16_1 PCIe x16_2 PCIe x1_1 PCIe x1_2 PCI 1 PCI 2 Realtek 8111F (LAN) ASMedia USB 3.
1.2.6 Onboard switches and buttons Onboard switches and buttons allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. DirectKey button This feature allows your system to go to the BIOS Setup program with the press of a button. With DirectKey, you can enter the BIOS anytime without having to press the key during POST.
2. MemOK! switch Installing DIMMs that are incompatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot. M5A97 R2.0 M5A97 R2.0 • Refer to section 1.2.8 Onboard LEDs for the exact location of the DRAM_LED. • The DRAM_LED also lights when the DIMM is not properly installed.
3. BIOS Flashback button USB BIOS Flashback allows you to easily update the BIOS without entering the BIOS or operating system. Just connect the USB storage device containing the BIOS file to the USB port, press the BIOS Flashback button, and the BIOS is updated automatically. M5A97 R2.0 BIOS_FLBK M5A97 R2.0 BIOS FLBK button For more details about using the USB BIOS Flashback button, refer to section 2.2.1 USB BIOS Flashback.
1.2.7 Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. CLRTC M5A97 R2.0 1 2 2 3 Normal (Default) Clear RTC M5A97 R2.0 Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2.
1.2.8 1. Onboard LEDs Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SB_PWR M5A97 R2.0 ON Standby Power OFF Powered Off M5A97 R2.0 Onboard LED 2.
1.2.9 CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2/3) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU FAN PWM CPU FAN IN CPU FAN PWR GND CHA FAN PWM CHA FAN IN CHA FAN PWR GND CHA_FAN2 CPU_FAN CHA_FAN3 CHA FAN PWM CHA FAN IN CHA FAN PWR GND 1. Internal connectors CHA_FAN1 GND CHA FAN PWR CHA FAN IN CHA FAN PWM M5A97 R2.0 M5A97 R2.
3. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. GND GND GND GND +12V DC +12V DC +12V DC +12V DC EATX12V M5A97 R2.
4. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~6) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, RAID 10, or JBOD configuration through the onboard controller.
5. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. PIN 1 DCD TXD GND RTS RI RXD DTR DSR CTS COM1 M5A97 R2.0 M5A97 R2.0 Serial port (COM1) connector The COM module is purchased separately. Digital audio connector (4-1 pin SPDIF_OUT) SPDIFOUT GND This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. +5V 6.
7. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. +5V Ground Ground Speaker SPEAKER PLED- PLED+ PLED PANEL M5A97 R2.0 IDE_LED PWRSW Reset Ground IDE_LED+ IDE_LED- PWR Ground PIN 1 RESET * Requires an ATX power supply M5A97 R2.0 System panel connector • • • • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector.
Front panel audio connector (10-1 pin AAFP) NC AGND NC NC SENSE2_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AGND NC SENSE1_RETUR 8. AAFP HD-audio-compliant pin definition MIC2 MICPWR Line out_R NC Line out_L M5A97 R2.0 PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L PIN 1 Legacy AC’97 compliant definition M5A97 R2.
10. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed.
Chapter 1 1-28 Chapter 1: Product introduction
Basic Installation 2.1 Building your PC system 2.1.1 Motherboard installation 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 1. Install the ASUS I/O Shield to the chassis rear I/O panel. Chapter 2 1 ASUS M5A97 R2.
2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel.
Place six screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 3. M5A97 R2.0 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS M5A97 R2.
2.1.2 CPU installation The AMD AM3+ socket is compatible with AMD AM3+ and AM3 processors. Ensure you use a CPU designed for the AM3+ socket. The CPU fits in only one correct orientation.
3 2.1.3 CPU heatsink and fan assembly installation ASUS M5A97 R2.0 Chapter 2 Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
To install the CPU heatsink and fan assembly 1 2 Chapter 2 2-6 Chapter 2: Getting started
3 4 Chapter 2 5 ASUS M5A97 R2.
2.1.
2.1.5 ATX Power connection 1 2 OR Chapter 2 OR ASUS M5A97 R2.
2.1.
2.1.7 Expansion Card installation To install PCIe x16 cards To install PCI cards Chapter 2 To install PCIe x1 cards ASUS M5A97 R2.
2.2 BIOS update utility 2.2.1 USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port, press the USB BIOS Flashback button for three seconds, and the BIOS is updated automatically. M5A97 R2.0 BIOS_FLBK M5A97 R2.0 BIOS FLBK button To use USB BIOS Flashback: 1. Place the bundled support DVD to the optical drive and install the USB BIOS Flashback Wizard.
2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection Rear panel connectors 1. PS/2 mouse port (green) 5. Optical S/PDIF Out port 2. LAN (RJ-45) port* 6. USB 3.0 ports 1 and 2 support ASUS USB 3.0 Boost UASP Mode. 3. Audio I/O ports** 7. PS/2 keyboard port (purple) 4. USB 2.0 ports (USB 2.0 port1 supports USB BIOS Flashback) * and **: Refer to the tables on the next page for LAN port LEDs, and audio port definitions.
* LAN ports LED indications Activity Link LED Speed LED OFF OFF Status Description ORANGE Linked BLINKING No link Data activity ACT/LINK LED Status Description ORANGE 100 Mbps connection GREEN SPEED LED 10 Mbps connection 1 Gbps connection LAN port ** Audio 2, 4, 6, or 8-channel configuration Port Light Blue Lime Pink Orange Black Gray Headset 2-channel Line In Line Out Mic In – – – 4-channel 6-channel 8-channel Line In Front Speaker Out Mic In – Rear Speaker Out – Line In Front Sp
2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Chapter 2 Connect to 2.1 channel Speakers ASUS M5A97 R2.
Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.
2.4 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 2 2-18 Chapter 2: Getting started
BIOS setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup: • Press during the Power-On Self Test (POST). If you do not press , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press hot key for the advanced BIOS settings. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section 3.
3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the Advanced Mode, click Exit, then select Advanced Mode or press F7 hotkey.
Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Back button This button appears when entering a submenu. Press or use the USB mouse to click this button to return to the previous menu screen.
3.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. Chapter 3 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.2.
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change an administrator password: 1.
To change a user password: 1. Select the User Password item and press . 2. From the Enter Current Password box, key in the current password, then press . 3. From the Create New Password box, key in a new password, then press . 4. Confirm the password when prompted. To clear the user password, follow the same steps as in changing a user password, but press when prompted to create/confirm the password.
Scroll down to display the following items. Scroll down to display the following items. Current CPU Speed: xxxxMHz Displays the current CPU speed. Target CPU Speed: xxxxMHz Displays the target CPU speed. Current Memory Frequency: xxxxMHz Displays the current memory frequency. Chapter 3 Current NB Frequency: xxxxMHz Displays the current NB frequency. Current HT Link Speed: xxxxMHz Displays the current HT Link speed. ASUS M5A97 R2.
3.4.1 Ai Overclock Tuner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [D.O.C.P.] Allows you to select a DRAM O.C. profile, and the related parameters will be adjusted automatically. [Manual] Allows you to individually set overclocking parameters.
Selecting a very high memory frequency may cause the system to become unstable! If this happens, revert to the default setting. 3.4.6 CPU/NB Frequency [Auto] Allows you to set the ratio between the NB (in CPU) Clock and the CPU Bus Frequency. Configuration options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz] 3.4.7 HT Link Speed [Auto] Allows you to select the HyperTransport link speed.
3.4.13 ������������������� DIGI+ Power Control CPU Load-Line Calibration [Auto] Load-line is defined by AMD VRM spec and affects CPU voltage. The CPU working voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage and better overclocking performance, but increases the CPU and VRM thermal. This item allows you to enable or disable the CPU Load-Line Calibration function.
3.4.16 DRAM Voltage [Auto] Allows you to set the DRAM voltage. The values range from 1.200000V to 2.500000V with a 0.006250V interval. 3.4.17 NB Voltage [Auto] Allows you to set the Northbridge voltage. The values range from 1.100000V to 1.250000V with a 0.006250V interval. 3.4.18 NB HT Voltage [Auto] Allows you to set the Northbridge HyperTransport voltage. The values range from 1.200000V to 1.400000V with a 0.006250V interval. 3.4.19 NB 1.8V Voltage [Auto] Allows you to set the Northbridge 1.
3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.5.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in submenu may be different due to the CPU you installed.
SVM [Enabled] [Enabled] [Disabled] Enables the AMD Secure Virtual Machine mode. Disables this function. Core C6 State [Enabled] Enables or disables Core C6 state function. Configuration options: [Disabled] [Enabled] HPC Mode [Enabled] Allows you to disable or enable High Performance Computing Mode. Configuration options: [Enabled] [Disabled] Apm Master Mode [Auto] Enables or disables Application Power Management. Configuration options: [Disabled] [Enabled] 3.5.
3.5.3 South Bridge HPET [Enabled] Allows you to disable or enable the HPET timer. Configuration options: [Disabled] [Enabled] 3.5.4 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SB SATA Configuration Allows you to set SATA options. OnChip SATA Channel [Enabled] Allows you to enable or disable serial ATA.
S.M.A.R.T. Status Check [Enabled] [Enabled] [Disabled] Enables the S.M.A.R.T feature. Disables the S.M.A.R.T feature. SATA ESP on PORT1 ~ 6 [Disabled] Configuration options: [Enabled] [Disabled] 3.5.5 USB Configuration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS).
3.5.6 CPU Core On/Off Function CPU Core Activation [Auto] This item lets user turn off cores except core 1, user can turn off 2nd, 3rd, 4th, 5th, etc core manually. Configuration options: [Auto] [Manual] The following items appear only when you set the previous item to [Manual] 3rd & 4th Core [Enabled] Configuration options: [Enabled] [Disabled] 3.5.7 Onboard Devices Configuration Asmedia USB 3.0 Controller (Rear) [Enabled] [Enabled] [Disabled] Enables the rear USB 3.0 controller.
SB HD Azalia Configuration Allows you to change the HD Azalia configuration. [Enabled] Enables the High Definition Audio Azalia device. [Disabled] Disables the device. The following two items appear only when you set the HD Audio Azalia Device item to [Enabled]. Azalia Front Panel [HD] Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports.
Power On By Ring [Disabled] [Disabled] [Enabled] Disables Ring to generate a wake event. Enables Ring to generate a wake event. Power On By RTC [Disabled] [Disabled] [Enabled] 3.5.9 Disables RTC to generate a wake event. When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/ Second will become user-configurable with set values. Network Stack Network Stack [Disable Link] This item allows user to disable or enable the UEFI network stack.
3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. 3.6.1 CPU Temperature / MB Temperature ������������� [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures. 3.6.2 VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage, VDDA2.5V Voltage 3.6.
3.6.4 CPU Q-Fan Control [Enabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. CPU_FAN�������������������������� Speed Low Limit [600 RPM] This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan warning speed.
3.6.5 Chassis Q-Fan Control [Disabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. Chassis������������������������������ Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed.
3.7 Boot menu 3.7.1 Bootup NumLock State [On] The Boot menu items allow you to change the system boot options. [On] [Off] 3.7.2 [Enabled] [Disabled] Sets the power-on state of the NumLock to [On]. Sets the power-on state of the NumLock to [Off]. Full Screen Logo [Enabled] Enables the full screen logo display feature. Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
3.7.4 DirectKey Enabled [Go to BIOS...] [Go to BIOS Setup] Allows the system to power on and go to BIOS setup directly when you press the DirectKey button. [Disabled] Disables the DirectKey function. 3.7.5 Option ROM Messages [Force BIOS] [Force BIOS] [Keep Current] 3.7.6 The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. INT19 Trap Response [Immediate] [Immediate] Allows Option ROMs to trap interrupt 19 right away.
3.8 Tools menu 3.8.1 ASUS EZ Flash 2 Utility The Tools menu items allow you to configure options for special functions. Select an item then press to display the submenu. Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen. For more details, see section 3.10.2 ASUS EZ Flash 2. 3.8.2 ASUS SPD Information DIMM Slot # [Slot 1] Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the selected slot.
3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select Yes to load the default values.
3.10 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility, or performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary. Visit the ASUS website (www.asus.
Launching ASUS Update To launch ASUS Update, click Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. From the ASUS Update screen, select Update BIOS from Internet, and then click Next. Model Name M5A97 R2.0 Version 0304 Release Date 05/11/2012 2. Select the ASUS FTP site nearest you to avoid network traffic.
Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. From the ASUS Update screen, select Update BIOS from file, and then click Next. Model Name M5A97 R2.0 Version 0304 Release Date 05/11/2012 2. Locate the BIOS file and click Next. Model Name M5A97 R2.0 E:\M5A97-R20-ASUS-0304.CAP Version 0304 Release Date 05/11/2012 Model Name M5A97 R2.0 Version 0304 Release Date 05/11/2012 3. 4. You can decide whether to change the BIOS boot logo.
3.10.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk or an OS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port. 2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press to enable it.
• ������������������������������������������������������������������������������������� This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • ������������������������������������������������������������������������������� DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability.
3.10.3 ASUS BIOS Updater The ASUS BIOS Updater allows you to update the BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2.
3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number. 4. At the FreeDOS prompt, type d: and press to switch the disk from Drive C (optical drive) to Drive D (USB flash drive). Welcome to FreeDOS (http://www.freedos.org)! C:\>d: D:\> Backing up the current BIOS To backup the current BIOS file using the BIOS Updater Ensure that the USB flash drive is not write-protected and has enough free space to save the file. 1.
Updating the BIOS file To update the BIOS file using BIOS Updater: 1. At the FreeDOS prompt, type bupdater /pc /g and press . D:\>bupdater /pc /g 2. The BIOS Updater screen appears as below. ASUSTek BIOS Updater for DOS V1.30 [2012/12/22] FLASH TYPE: MX1C 25L1065A Current ROM Update ROM BOARD:M5A97 R2.0 BOARD: UNKNOWN VER: 0304 VER: UNKNOWN DATE: 05/11/2012 DATE: UNKNOWN PATH: A:\ M5A97R20.CAP 2097152 2012-05-11 17:30:48 A: Note [Enter] Select or Load [Up/Down/Home/End] Move 3.
Chapter 3 3-36 Chapter 3: BIOS setup
Software support 4.1 Installing an operating system 4 This motherboard supports Windows XP/ 64-bit XP/ Vista / 64-bit Vista / 7 / 64-bit 7 operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 4.2 ® • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. 2. The Manual folder of the support DVD appears. Double-click the folder of your selected software.
4.3 Software information 4.3.1 AI Suite II Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously. Installing AI Suite II To install AI Suite II on your computer: 1.
4.3.2 TurboV EVO ASUS TurboV EVO includes TurboV that allows you to manually adjust the CPU frequency and related voltages such as CPU Level Up that offers automatic and easy overclocking and system level up. To launch AI Suite II, click Tool > TurboV EVO on the AI Suite II main menu bar. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
Using Advanced Mode Click on the Advanced Mode tab to adjust the advanced voltage settings. Advanced mode Target values Voltage Adjustment bars Current values Undoes all the changes Click to restore all startup settings Applies all the changes immediately CPU Ratio Allows you to manually adjust the CPU ratio. 1. Click on the CPU Ratio tab. 2. Drag the adjustment bar upwards or downwards to the desired value. 3. Click Apply to save the changes made.
Auto Tuning ASUS TurboV EVO provides you with these two auto-tuning modes for the most flexible autotuning options. • • • The overclocking result varies with the CPU model and the system configuration. • We recommend that you set up a better thermal environment to prevent overheating from damaging the motherboard. Fast Tuning: fast overclocking for the system Extreme Tuning: extreme overclocking for the system Using Fast Tuning 1. Click Auto Tuning tab > Fast. 2.
Using Extreme Tuning 1. Click Auto Tuning tab > Extreme. 2. Read the warning messages and click Start to start the auto-overclocking process. TurboV automatically overclocks the CPU and memory, and restarts the system. 3. After the system has restarted, a message appears indicating the current overclocking result. To keep the result, click Stop. 4. If you did not click Stop in the previous step, TurboV automatically starts further system overclocking and stability test.
4.3.3 EPU EPU is an energy-processing utility that provides several power-saving modes. When set to the Auto Mode, the system automatically changes its power-saving mode based on the current system condition. You can also configure the system settings such as CPU frequency, GPU frequency, vCore Voltage, and Fan Control to customize a power-saving mode. Launching EPU To launch EPU, click Tool > EPU on the AI Suite II main menu bar.
4.3.4 Remote GO! Connect your computer to a wireless network and use Remote GO! to wirelessly stream media files to DLNA devices. It allows you to remotely control and access your computer using your mobile device, and easily transfer files between your computer and mobile device. • Remote GO! is supported only on Windows® 7. • All devices using the Remote GO! functions must be in the same network. Using Remote GO! To launch Remote GO!, click Tool > Remote GO! on the AI Suite II menu bar.
W-Fi GO! Remote Install the W-Fi GO! Remote application on your mobile device to use Remote GO!’s remote control functions. • Wi-Fi GO! Remote supports iOS 4.0/Android 2.3 mobile devices or later versions. • For iOS devices, download the W-Fi GO! Remote from iTunes store. For Android devices, download the W-Fi GO! Remote from Google Play Store or from ASUS support DVD. Launching W-Fi GO! Remote 1. Turn on your mobile device’s wireless connection.
W-Fi GO! Remote menu The W-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system.
DLNA Media Hub DLNA Media Hub allows you to stream your multimedia files to your DLNA-supported device and remotely control playback using your mobile device or your computer. Click to select media file type Tick to select source location Click to refresh media files Media files pane Displays the target receiver’s name and the media file currently playing Click to go back to main menu Click to edit the playlist Click to select receiver Using the DLNA Media Hub 1.
To play music: 1. Click Music tab. 2. Tick Library to view or play files. Tick Playlist and select an existing playlist from the dropdown list. 3. Click a music file, and click . To edit the library: 1. Tick Library. 2. Click files. 3. Click Add and locate the file from the directory. To delete, tick the selected file and click Delete. 4. Click OK. to add or delete music To edit the music playlist: 1. Tick Playlist. 2. Click 3.
To play a video file: 1. Click Video tab. 2. Tick Library to view the video files from your local computer. Tick Playlist to view the video files saved in your profile. 3. Click the video file you want to watch, and click . Change the resolution from the Quality dropdown list. To edit the video library: 1. Tick Library. 2. Click files. 3. Click Add and locate the file from the directory. To delete, tick the selected file and click Delete. 4. Click OK.
To view images: 1. Click Photo tab. 2. Tick Library to view the image files from your local computer. Tick Playlist to view the image files saved in your profile. An image slideshow plays when pressing . To edit the image library: 1. Tick Library. 2. Click files. 3. Click Add and locate the file from the directory. To delete, tick the selected file and click Delete. 4. Click OK. to add or delete image To edit the image playlist: 1. Tick Playlist. 2. Click 3.
Using the DLNA Media Hub via W-Fi GO! Remote You can access the DLNA Media Hub on your mobile device via W-Fi GO! Remote. 1. Tap DLNA Media Hub. 2. Select and tap the receiver name. 3. The mobile device shows the information of the DLNA Media Hub function. Tap Enter to proceed to the Remote GO! function. 4. Tap Music, Video or Photo, to play. Your mobile device’s WI-FI GO! Remote interface may vary with the mobile device’s operating system.
3. Select a suitable codec Auto, Speed optimization, or Image optimization for your mobile device. 4. Click Apply. Click to select a video codec Application help Click to go back to previous screen Using the Remote Desktop via W-Fi GO! Remote Chapter 4 When the Remote Desktop is enabled, the mobile device shows the contents of your desktop. The W-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system. ASUS M5A97 R2.
File Transfer Allows you to transfer files wirelessly between your computer and mobile device. Before using File Transfer, ensure that your computer is connected to your mobile device. For more details, refer to the section Wi-Fi GO! Remote.
Tap to select the file’s source location Tap to select files for transfer Tap to send selected files Tap to select all files Tap to clear all files The W-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system. Securing your computer for Wi-Fi GO! Remote functions Remote GO! Settings allows you to create a password for your computer. To create a password: 1. Click in the main menu. 2. Tick Use Password and key in your password. 3.
4.3.5 USB 3.0 Boost ASUS USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) and automatically increases a USB 3.0 device’s transfer speed up to 170%. Launching USB 3.0 Boost To launch USB 3.0 Boost, click Tool > USB 3.0 Boost on the AI Suite II main menu bar. Configuring USB 3.0 Boost 1. Connect a USB 3.0 device to the USB 3.0 port. USB 3.0 Boost automatically detects the property of the USB 3.0 device and switches to Turbo mode or UASP mode (if UASP is supported by the USB 3.
4.3.6 Network iControl ASUS Network iControl is an intuitive one-stop network control center that makes it easier for you to manage your network bandwidth and allows you to set, monitor, and schedule the bandwidth priorities for your network programs. It also allows you to automatically connect to a PPPoE for a more convenient online experience. To launch Network iControl, click Tool > Network iControl from AI Suite II main menu bar. • Ensure to install the LAN drivers before using this function.
Using Quick Connection Configuring the PPPoE connection settings Before enabling the Network iControl’s Quick Connection functions, you must configure the PPPoE connection settings To configure the PPPoE settings: Chapter 4 4-22 in the taskbar, and select Open Network and Sharing Center. 1. Right-click 2. Right-click the PPPoE Connection, and select Properties. 3. Click the Options tab, and deselect Prompt for name and password, certificate, etc.
Configuring the Quick Connection To configure the auto-PPPoE connection: 1. Click the Quick Connection tab. 2. Tick Automatically connect online anytime option, then select the connection name in the Connection Name dropdown box. 3. Click Apply to enable the PPPoE automatic network connection. Click to select Connection Name Tick to set the auto PPPoE connection Click to apply settings Chapter 4 Click ON to improve network performance ASUS M5A97 R2.
Using EZ Profile To use the EZ Profile: EZ Profile allows you to load, edit, and save your own network program priority profile. 1. Click the EZ Profile tab. The programs are shown in the network program column. 2. Select the network program, and click 3. Click to save the changes and/or rename your profile. 4. Click , , or to set the program priority as High, Normal, or Low.
4.3.7 USB BIOS Flashback Wizard USB BIOS Flashback allows you to easily update the BIOS without entering the BIOS or operating system. Just connect the USB storage device containing the BIOS file to the USB port, press the BIOS Flashback button, and the BIOS is updated automatically. Sets the schedule for BIOS Update download M5A97R20.CAP M5A97 R2.
2. From the Save to dropdown list, select the USB storage device that you want to save the BIOS file to, then click Download. 3. When the download process is completed, click OK to exit.
4.3.8 FAN Xpert Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different geographic regions and your PC’s system loading. The built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment.
4.3.9 Ai Charger+ This utility allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**. • * Check your manufacturer if your USB device is a Battery Charging Specification 1.1 (BC 1.1) compliant or compatible device. • ** Actual charging speeds may vary depending on the charging rate and specifications of your USB device.
4.3.10 Probe II Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II To launch Probe II, click Tool > Probe II on the AI Suite II main menu bar.
4.3.11 Sensor Recorder Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate specific time spans on record to keep track of the three system statuses for certain purposes. Launching Sensor Recorder To launch Sensor Recorder, click Tool > Sensor Recorder on the AI Suite II main menu bar. Using Sensor Recorder Click on Voltage/ Temperature/ Fan Speed tabs for the status you want to monitor.
Using History Record 1. Click the History Record tab and adjust the settings on the left for Record Interval and Record Duration according to need. 2. Click Start Recording to start measuring and recording each sensor. 3. To stop recording, click Recording again. 4. To track the recorded contents, set Type/ Date/ Select display items to display the history details. Chapter 4 Click Monitor > Sensor on the AI Suite II main menu bar and the system status will appear on the right panel. ASUS M5A97 R2.
4.3.12 ASUS Update ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. Launching ASUS Update To launch ASUS Update, click Update > ASUS Update on the AI Suite II main menu bar. Using ASUS Update Select any of these options to update the BIOS: • Update BIOS from Internet Allows you to download the latest BIOS version from the ASUS website at www.asus.com and follow the onscreen instructions to update the BIOS.
4.3.13 MyLogo2 MyLogo2 allows you to customize the boot logo, which is the image that appears on the screen during the Power On Self Tests (POST). Launching MyLogo2 To launch MyLogo2, click Update > MyLogo on the AI Suite II main menu bar. Using MyLogo Select the option that you want to use to update your boot logo, click Next and follow the instructions below.
3. Do any of the following: • Click Auto Tune to adjust the image size or the image resolution. • Click Booting Preview to preview the boot image. 4. Click Next. 5. Click Flash to update the boot logo. 6. When prompted, click Yes to reboot the system. You will see the new boot logo the next time you start up the system. Ensure to enable the Full Screen Logo in BIOS to use this feature.
4.3.14 Audio configurations The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ® (Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and giving users plug and play convenience.
Chapter 4 4-36 Chapter 4: Software support
RAID support 5.1 RAID configurations 5 The motherboard comes with the AMD® SB950 chipset that allows you to configure Serial ATA hard disk drives as RAID sets. The motherboard supports the following RAID configurations: RAID 0, RAID 1, RAID 5 and RAID 10. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions.
5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 5.1.
5.1.4 AMD® Option ROM utility To enter the AMD® Option ROM utility: 1. Turn on the system. 2. During POST, press + to display the utility main menu. The Main Menu allows you to select an operation to perform. The Main Menu options include: • View Drive Assignments: shows the status of the hard disk drives. • Delete LD Menu: deletes a selected RAID set and partition.
Creating a RAID volume To create a RAID volume: 1. In the Main Menu, press <2> to enter the LD View / LD Define Menu function. 2. Press + , and the following screen appears. 3. Move to the RAID Mode item and press to select a RAID mode to create. 4. Move to the Assignment item by using the down arrow key and set Y to select the hard disk drives you want to include in the RAID set. 5. Press + to save the setting. 6. The utility prompts the following message.
Deleting a RAID configuration Be cautious when deleting a RAID volume. You will lose all data on the hard disk drives when you delete a RAID volume. To delete a RAID volume: 1. In the Main Menu, press <3> to enter the Delete LD function. 2. Select the RAID item you want to delete and press or + . 3. The utility prompts the following messages: Press + to delete the RAID volume.
5.2 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing a Windows® operating system on a hard disk drive that is included in a RAID set. • ��������������������������������������������������������������������������������� The motherboard does not provide a floppy drive connector. You have to use a USB floppy disk drive when creating a SATA RAID driver disk. • ������� Windows® XP may not recognize the USB floppy disk drive due to Windows® XP limitation.
5.2.3 Installing the RAID driver during Windows® OS installation To install the RAID driver in Windows® XP: 1. During the OS installation, the system prompts you to press the key to install third-party SCSI or RAID driver. 2. Press , and then insert the floppy disk with RAID driver into the USB floppy disk drive. 3. When prompted to select the SCSI adapter to install, select the RAID driver for the corresponding OS version. 4.
5.2.4 Using a USB floppy disk drive Due to OS limitation, Windows® XP may not recognize the USB floppy disk drive when you install the RAID driver from a floppy disk during the OS installation. To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product ID (PID) to the floppy disk containing the RAID driver. Refer to the steps below: 1. Using another computer, plug the USB floppy disk drive, and insert the floppy disk containing the RAID driver. 2.
7. Use Notepad to open the file. 8. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem file. 9. Type the following line to the bottom of the two sections: id = “USB\VID_xxxx&PID_xxxx”, “usbstor” [HardwareIds.SCSI.
Chapter 5 5-10 Chapter 5: RAID configurations
Multiple GPU support 6.1 AMD® CrossFireX™ technology 6.1.1 Requirements 6 The motherboard supports the AMD® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. • • • In Dual CrossFireX mode, you should have two identical CrossFireX-ready graphics cards or one CrossFireX-ready dual-GPU graphics card that are AMD® certified. Ensure that your graphics card driver supports the AMD CrossFireX technology.
6.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3.
6.1.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com). 6.1.5 Enabling the AMD® CrossFireX™ technology After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the AMD VISION Engine Control Center in Windows environment.
Enabling Dual CrossFireX technology 1. In the Catalyst Control Center window, click Performance > AMD CrossFireXTM. 2. Select Enable CrossFireXTM. 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made.
Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s).
REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
M5A97 R2.0 A-5 (510)739-3777/(510)608-4555 800 Corporate Way, Fremont, CA 94539. Asus Computer International Signature : Date : Representative Person’s Name : Jun. 04, 2012 Steve Chang / President This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
A-6 Appendices