Mini PC PN53 Series User Manual
E21483 Revised Edition V2 November 2022 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual..................................................................................................................5 Conventions used in this manual.....................................................................................6 Package contents...................................................................................................................7 Getting to know your Mini PC Features................................................................................
Contents Appendix Safety information..................................................................................................................46 Setting up your system........................................................................................................47 Care during use.......................................................................................................................48 Regulatory notices..........................................................................
About this manual This manual provides information about the hardware and software features of your Mini PC, organized through the following chapters: Chapter 1: Getting to know your Mini PC This chapter details the hardware components of your Mini PC. Chapter 2: Using your Mini PC This chapter provides you with information on using your Mini PC.
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your Mini PC's data and components.
Package contents Your Mini PC package contains the following items: ASUS Mini PC PN Series AC power adapter* Power cord* Technical documentation ASUS Mini PC PN Series 7
NOTE: • *The bundled power adapter may vary by model and territory. • Some bundled accessories may vary with different models. For details on these accessories, refer to their respective user manuals. • The device illustration is for reference only. Actual product specifications may vary depending on model.
1 Getting to know your Mini PC
Features Front view Drive activity indicator This indicator lights up when your Mini PC is accessing the internal storage drive. Headphone/Headset/Microphone jack (optional) This port allows you to connect amplified speakers or headphones. You can also use this port to connect your headset or an external microphone.
USB4™ port This USB4™ (Universal Serial Bus 4) port provides the following: • Transfer rate of up to 40 Gbit/s for USB4 devices. • DisplayPort 1.4 support (5120 x 2160 @30Hz). • Backward compatible to USB 3.2. • USB power delivery with a maximum of 5 V / 3 A output. USB 3.2 Gen 1 port The USB 3.2 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5 Gbit/s. Power button The power button allows you to turn the Mini PC on or off.
Left view Padlock ring This ring allows you to attach a standard padlock to prevent unauthorized disassembly of your Mini PC. NOTE: The padlock is purchased separately. Kensington security slot The Kensington security slot allows you to secure your Mini PC using Kensington® security products. Air vents (intake vent) The air vents allow cooler air to enter your Mini PC chassis. IMPORTANT: For optimal heat dissipation and air ventilation, ensure that the air vents are free from obstructions.
Right view Air vents (intake vent) The air vents allow cooler air to enter your Mini PC chassis. IMPORTANT: For optimal heat dissipation and air ventilation, ensure that the air vents are free from obstructions.
Rear view HDMI™ port The HDMI™ (High Definition Multimedia Interface) port supports a Full-HD device, such as an LCD TV or monitor, to allow viewing on a larger external display. NOTE: The left HDMI port supports CEC (Consumer Electronics Control). Connect any CEC compatible device that you want to control with a remote control to this port, and make sure that the device’s HDMICEC is enabled.
Air vents (exhaust vent) The air vents allow your Mini PC chassis to expel hot air. IMPORTANT: For optimal heat dissipation and air ventilation, ensure that the air vents are free from obstructions. Configurable port This port varies between models and consists of the following port options: NOTE: This port may vary depending on model. VGA port This port allows you to connect your Mini PC to an external display.
HDMI™ port The HDMI™ (High Definition Multimedia Interface) port supports a Full-HD device, such as an LCD TV or monitor to allow viewing on a larger external display. NOTE: When using only this port as a display output source, this port will support a resolution of up to 7680 x 4320 @60Hz. The resolution may also be affected by the cabling and output device. DisplayPort This port allows you to connect your Mini PC to an external display.
USB4™ / Power Delivery input combo port This USB4™ (Universal Serial Bus 4) port provides the following: • Transfer rate of up to 40 Gbit/s for USB4 devices. • DisplayPort 1.4 support (5120 x 2160 @30Hz). • Backward compatible to USB 3.2. • USB power delivery with a maximum of 5 V / 3 A output. • Support for power (DC) input when connected to an external device that is PD (Power Delivery) compliant with a 20V / 5A output.
Power input The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Mini PC. To prevent damage to the Mini PC, always use the supplied power adapter. WARNING! The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body. NOTE: Please refer to the following information on the power adapter: 120W Power adapter: +20V DC 6A, 120W 150W Power adapter: +20V DC 7.
Using your Mini PC 2
Getting started Connect the AC power adapter to your Mini PC To connect the AC power adapter to your Mini PC: A. Connect the power cord to the AC power adapter. B. Connect the DC power connector into your Mini PC’s power (DC) input. C. Plug the AC power adapter into a 100V~240V power source. NOTE: The power adapter may vary in appearance, depending on the model and your region.
NOTE: Please refer to the following for more information on the adapter: 120 W Power adapter • Input voltage: 100-240 Vac • Input frequency: 50-60 Hz • Rating output current: 6 A (120 W) • Rating output voltage: 20 V 150 W Power adapter • Input voltage: 100-240 Vac • Input frequency: 50-60 Hz • Rating output current: 7.
Connect a display panel to your Mini PC You can connect a display panel or projector to your Mini PC that has the following port: • HDMI™ port • VGA port • DisplayPort • USB4™ port NOTE: • Up to five display panels may be connected, depending on model and selected options*. However, only a maximum of four can be displayed simultaneously.
To connect a display panel to your Mini PC: Connect one end of an HDMI™, VGA, DisplayPort, or USB Type-C® cable to an external display, and the other end of the cable to your Mini PC’s HDMI™ port, VGA port, DisplayPort, or USB4 port.
Connect display via VGA port Connect display via USB4™ port 24 ASUS Mini PC PN Series
Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your Mini PC. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your Mini PC: Connect the USB cable from your keyboard and mouse to any of the USB ports of your Mini PC. NOTE: The keyboard varies with country and/or region.
Turn on your Mini PC Press the power button to turn on your Mini PC.
Turning off your Mini PC If your Mini PC is unresponsive, press and hold the power button for at least four (4) seconds until your Mini PC turns off. Putting your Mini PC to sleep To set your Mini PC to enter Sleep mode by pressing the Power button once, search for Control Panel in the Windows Search Box, then navigate to Hardware and Sound > Power Options > Choose what the power button does, and set When I press the power button to Sleep.
Load default BIOS settings To load the default values for each of the parameters in your BIOS: 1. Enter the BIOS by pressing or from the POST screen. NOTE: POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when you turn on your Mini PC. 2. 3. 4. 28 Navigate to the Exit menu. Select the Load Optimized Defaults option or press . Select OK to load the default BIOS values.
3 Upgrading your Mini PC
IMPORTANT! • It is recommended that you install or upgrade the memory modules, wireless card, and solid state drive (SSD) under professional supervision. Visit an ASUS service center for further assistance. • Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity.
Removing the bottom cover 1. Turn off your Mini PC then disconnect all cables and peripherals. 2. Place the Mini PC on a flat stable surface with its top side facing down. 3. Completely loosen the four (4) screws from the bottom cover.
4. Gently lift the bottom cover in the direction shown in the illustration (A), then flip the connector flaps open (B) and remove the cable (C).
Replacing the bottom cover 1. Insert the cable into the connectors (A), then close the flaps to secure the cables (B). Close the bottom cover (C). IMPORTANT! Ensure the PCB gold fingers on the cable are facing the connectors.
2. Tighten the four (4) screws on the bottom cover to secure it in place.
Installing memory modules Your Mini PC comes with two SO-DIMM memory slots that allow you to install two DDR5 SO-DIMMs. IMPORTANT! Refer to http://www.asus.com for a list of compatible DIMMs. You can only install DDR5 SO-DIMMs to the Mini PC’s DIMM slots. Align and insert the memory module into the slot (A) and press down (B) until it is securely seated in place. Repeat the same steps to install the other memory module.
Installing a 2.5” HDD or SSD 1. Prepare your 2.5” HDD or SSD, then align it with the storage bay on the bottom cover of your Mini PC. 2. Insert your HDD or SSD into the storage bay. IMPORTANT! This device only supports 7mm 2.5” HDD or SSD.
3. Secure the HDD or SSD with three (3) screws.
Installing an M.2 SSD Your Mini PC comes with two M.2 slots; one in the chassis and another on the bottom cover. To install an M.2 SSD into the chassis 1. Align and insert the 2280 M.2 SSD into its slot inside the Mini PC. 2. Gently push down the 2280 M.2 SSD on top of the screw hole and fasten it using one of the bundled 3mm round screws. NOTE: If you wish to install a Gen 4 SSD, ensure to install it to the M.2 slot in the chassis.
3. Before replacing the bottom cover, ensure to remove the plastic film on the thermal pad.
To install an M.2 SDD to the bottom cover 1. Remove the plastic film from the thermal pad. 2. Align and insert the 2280 M.2 SSD into its slot on the bottom cover. 3. Gently push down the 2280 M.2 SSD on top of the screw hole and fasten it using one of the bundled 3mm round screws.
Installing a wireless card NOTE: Your Mini PC includes an M.2 slot for 2230 wireless and Bluetooth modules. Refer to http://www.asus.com for a list of compatible wireless and Bluetooth modules. 1. (optional) Remove the M.2 SSD if an M.2 SSD is installed. To remove the M.2 SSD, remove the screw from the screw hole, then remove the M.2 SSD. 2. Align and insert the wireless card into its slot inside the Mini PC. 3.
ASUS Mini PC PN Series
TPM 4
About the TPM The system comes with two (2) TPM options: firmware TPM (fTPM) or the discrete TPM (dTPM). The dTPM is an onboard chip and the availability of the onboard dTPM chip may vary between models. NOTE: • The fTPM is supported by default, but may not be enabled, for more information on enabling the TPM, please refer to www.asus.com/support.
Appendix
Safety information Your Mini PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. WARNING KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users Setting up your system • Read and follow all instructions in the documentation before you operate your system. • Do not use this product near water or a heated source.
Care during use • Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord from the power outlets before cleaning the system. • If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. – The power cord or plug is damaged.
Safety Precautions Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.
Regulatory notices COATING NOTICE IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.
IMPORTANT! Outdoor operations in the 5.15~5.25 GHz band is prohibited. This device has no Ad-hoc capability for 5250~5350 and 5470~5725 MHz. CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.
Türkiye RoHS AEEE Yönetmeliğine Uygundur ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http:// csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. key on the keyboard. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity.
Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for countries listed in the table below: a.
Simplified UKCA Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for the country listed below: a.
Service and Support Visit our multi-language website at https://www.asus.com/support/.
