User's Manual

20
3.2 Administration
3.2.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1. From the navigation panel, go to Settings > Administration >
Operation Mode.
2. Select any of these operation modes:
• Wireless router mode / AiMesh Router mode (Default):
AiMesh Router mode is a traditional mode with AiMesh
functionality, which connects to the Internet via PPPoE,
DHCP, PPTP, L2TP, or Static IP and shares the wireless network
to LAN clients or devices. In this mode, NAT, rewall, and
DHCP server are enabled by default. UPnP and Dynamic DNS
are supported for SOHO and home users.
• AiMesh Node: You can add AiMesh nodes to form an AiMesh
WiFi system to provide extra WiFi coverage.
3. Click Save.
NOTE: The router will reboot when you change the modes.