User's Manual

21
3.2.2 System
The System page allows you to congure your wired router
settings.
To set up the System settings:
1. From the navigation panel, go to Settings > Administration >
System.
2. You can congure the following settings:
• Change router login password: You can change the
password and login name for the wired router by entering a
new name and password.
• USB setting: You can Enable HDD Hibernation and change
USB mode.
• Time Zone: Select the time zone for your network.
• NTP Server: The wired router can access a NTP (Network
time Protocol) server in order to synchronize the time.
• Network Monitoring: You can enable DNS Query to check
Resolve Hostname and Resolved IP Addresses, or enable
Ping, then check your Ping Target.
• Auto Logout: You can set the time of auto-logout.
• Enable WAN down browser redirect notice: This feature
allows the browser to display a warning page when the
router is disconnected from Internet. When disabled, the
warning page will not appear.
• Enable Telnet: Click Ye s to enable Telnet services on the
network. Click No to disable Telnet.
• Authentication Method: You can select HTTP, HTTPS, or
both protocols to secure router access.
• Enable Reboot Scheduler: When enabled, you can set the
Date to Reboot and Time of Day to Reboot.
• Enable Web Access from WAN: Select Ye s to allow devices
outside the network to access the wired router GUI settings.
Select No to prevent access.
• Enable Access Restrictions: Click Ye s if you want to specify
the IP addresses of devices that are allowed to access to the
wired router GUI settings from WAN/LAN.