User's Manual

74
3.17.2 Multi-WAN
The Multi-WAN allows you to select multiple ISP connections to
your router and the WAN groups for both primary and secondary
WANs.
To congure Multi-WAN:
1. From the navigation panel, go to Settings > WAN > Multi-
WAN.
2. Turn on Enable Multi-WAN.
3. Choose your Primary WAN and Secondary WAN. There are
WAN, USB and Ethernet LAN for your options.
4. Choose Fail Over or Time.
Fail Over: Use a secondary WAN for backup network access.
Time: Set the time to schedule your Multi-WAN policy.
5. Choose Active Backup WAN when any primary WAN port
failed or Active Backup WAN when all primary WAN port
failed.
6. Turn on or o Allow failback.
7. Specify the detection interval.
8. Specify the number of continuous failure times before the
current WAN is considered disconnected.