User's Manual

8
1.3 Your wired router
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode.
PoE Alert LED
O: No power or no physical connection.
On: Power is being supplied to a device attached to the PoE+ port.
Reset button
This button resets or restores the system to its factory default settings.
USB 3.2 Gen 1 port
Insert a USB 3.2 Gen 1 device such as a USB hard disk or a USB ash drive into this port.
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
WAN / LAN ports (with PoE+)
Connect a network cable into this port to establish WAN / LAN connection.
LAN ports (with PoE+)
Connect your PC to a LAN port with a network cable.
Power (DCIN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
1
Plug the adapter into the DCIN port.
2
The power LED will light up when your hardware is ready.
Button and Port Explanations