User's Manual

84
3.18 Wireless
3.18.1 General
The General tab allows you to congure the basic wireless
settings.
To congure the basic wireless settings:
1. From the navigation panel, go to Settings > Wireless >
General.
2. Assign a unique name for your SSID (Service Set Identier)
or network name to identify your wireless network. Wi-Fi
devices can identify and connect to the wireless network via
your assigned SSID. The SSIDs on the information banner are
updated once new SSIDs are saved to the settings.
IMPORTANT! To make the Wi-Fi function available, ensure to
integrate a wireless Access Point (AP) such as ExpertWiFi EBA63
or router such as ExpertWiFi EBR63 or ExpertWiFi EBM68 into the
EBG19P’s AiMesh network.
3. In the Hide SSID eld, select Ye s to prevent wireless devices
from detecting your SSID. When this function is enabled, you
would need to enter the SSID manually on the wireless device
to access the wireless network.
4. Select any of these authentication methods:
• Open System: This option provides no security.
• WPA/WPA2/WPA3-Personal: This option provides strong
security. You can use either WPA (with TKIP) or WPA2 (with
AES). If you select this option, you must use TKIP + AES
encryption and enter the WPA passphrase (network key).