User's Manual

88
Check if your Ethernet cables are plugged properly.
• When the Ethernet cable connecting the router with the
modem is plugged in properly, the WAN LED will be on.
• When the Ethernet cable connecting your powered-
on computer with the router is plugged in properly, the
corresponding LAN LED will be on.
Check if your network settings are correct.
• Each client on the network should have a valid IP address.
ASUS recommends that you use the wired router’s DHCP server
to assign IP addresses to computers on your network.
• Some cable modem service providers require you to use
the MAC address of the computer initially registered on
the account. You can view the MAC address in the web GUI,
Dashboard > Clients.