User's Manual
Table Of Contents
- About this user guide
- Getting to know your Meet Compute System
- Using your Meet hardware kit
- Configuring your ASUS - Google Meet hardware kit
- Troubleshooting
- Appendix
- À propos de ce manuel
- Présentation de votre kit Meet Compute System
- Utilisation du Meet hardware kit
- Prise en main
- Connecter un périphérique d'affichage à votre kit Meet Compute System
- Connecter le haut-parleur / microphone
- Connecter la caméra
- Connecter l'écran tactile
- Installer le dongle de contrôle à distance sur votre kit Meet Compute System
- Connecter l'adaptateur secteur à votre votre kit Meet Compute System
- Allumer votre kit Meet Compute System
- Prise en main
- Configuration de votre kit ASUS - Google Meet
- Dépannage
- Annexes
33
Using the Wall mount
Use the wall mount plate to attach the Meet Compute System to a wall.
Please follow the steps below to install the wall mount and Meet Compute
System:
IMPORTANT! The equipment should not be mounted higher than
2 m from the floor or should not be mounted higher than 75 cm from a flat
surface.
Setup your system
You can mount your Meet Compute System to the wall mounting plate or
mount the Meet Compute System to the standing mount.
WARNING!
•
Pulling or pushing on the Meet Compute System may cause the device to fall.
• Do not install your mount kit while your Meet Compute System is turned
on. This may cause personal injuries or damage the system.
NOTE: The bundled items may vary between models. The wall mounting plate
and standing mount may not be included.