User's Manual

42
Installing M.2 SSDs
1. (Optional) Remove the storage bay if a storage bay is installed. Follow
steps 1 - 2 under the Installing 2.5” HDD or SSD section to remove the
storage bay.
2. Remove the four (4) screws securing the heatsink, and then remove
the heatsink.
3. Align and insert an M.2 SSD into one of the two slots inside the Mini
PC.
4. Secure the M.2 SSD with the bundled screw.
5. Repeat steps 3 and 4 to install a second M.2 SSD.
6. Before replacing the heatsink, ensure to remove the plastic lm
strip(s) from the thermal pad(s) adhered to the back of the heatsink
that corresponds to the installed M.2 SSD(s).
7. Reinstall the heatsink using the four (4) screws removed previously.