TS300-E8-PS4 Manual

Chapter 2: Hardware setup2-6
5. Close the load plate (A), ensuring
that the front edge of the load plate
slides under the retention lock (B)
then push down the load lever (C).
Retention
lock
Load lever
6. Insert the load lever under the retention tab to remove the PnP cap from the
CPU socket.
Retention
tab
Load
lever
8. Apply some Thermal Interface
Material to the exposed area of
the CPU that the heatsink will be
in contact with, ensuring that it is
evenly spread in a thin layer.
Some heatsinks come with
pre-applied Thermal Interface
Material. If so, skip this step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it.
If it gets into your eyes or touches
your skin, wash it off immediately
and seek professional medical
help.