ASUS DL101 User Manual E12914 Revised Edition V3 May 2017 E12914_DL101_UM_V3.
COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents Package contents.......................................................................................................4 Product overview.......................................................................................................5 Front View........................................................................................................................... 5 Back View...........................................................................................................
Package contents NOTE: • If any of the following items are damaged or missing, contact your retailer. • The illustrated items below are for reference only. • Specifications subject to change without notice. OPEN 1 x ASUS DL101 interior unit cover 1 x ASUS DL101 exterior unit 1 x Deadbolt E12914_DL101_UM_V3.
Product overview Front View Touchscreen panel Keyhole Use your palm to touch the touchscreen panel, or place your finger on the NFC logo for at least 1 second to activate the keypad. E12914_DL101_UM_V3.
Back View Battery compartment Join button Reset button LED status indicator Thumbturn lever NOTE: Refer to LED information section for more details on the LED status indicator. E12914_DL101_UM_V3.
LED information The LED status indicator helps identify the current status of your ASUS DL101. Refer to the following table for details: Color Solid Blue Status Description Battery inserted LED lights up for 2 seconds and the alarm makes Do-Re-Mi sound Use the companion app to identify which device is connected to the gateway Identifying device NOTE: Ensure to connect your device with the gateway before using this feature through the companion app.
Alarm information • • • • • Short beep last for 0.1 second, long beep lasts for 0.5 second, both are at 85 dB. Two short beeps indicates the operation is normal or the setting is successful; one long beep indicates abnormal operation or the setting is unsuccessful. Three long beeps indicates that system protection has been activated, the touchscreen panel will be locked for 2 minutes; low power warning.
Safety notices • • • • • • • • • • Replace all batteries immediately when the low-battery warning sounds. DO NOT mix old batteries with new batteries, from different brands, or alkaline and carbon-zinc batteries. Insert the batteries according to the correct polarity. DO NOT attempt to repair the product by yourself. Change your codes regularly. Minimize the exposure to moisture including wet hands and direct contact with liquids.
Getting started Determining door status Take note of which direction your door will be opened before installing your ASUS DL101, the orientation will be different for left-handed doors and right-handed doors. Left-handed door when viewed from the outside. E12914_DL101_UM_V3.indd 10 Right-handed door when viewed from the outside.
Preparing your door NOTE: The installation steps shown in this manual is for a lefthanded door and for reference only. 1. Adjust the lockbolt length to fit your door by rotating it clockwise or anticlockwise (this product supports 60mm or 70mm configuration, the illustration on the right is the 60mm configuration). 2 - 3/8”(60mm) 2. Attach the drilling template to the door and mark it with a pen. NOTE: Use the Drilling template attached in the manual to help mark the drilling location.
3. Drill the holes as indicated on the template. NOTE: The location of the holes will vary per thickness of the door. 4. Insert the deadbolt into the door and mark the face plate. WARNING! The cross-shaped opening in the deadbolt should be orientated at the bottom (see red circle area). E12914_DL101_UM_V3.
5. Chisel out a 4 mm recess along the marked lines. 6. Insert the deadbolt again and close the door, then mark the door frame with the lock bolt and the face plate. WARNING! The cross-shaped opening in the deadbolt should be orientated at the bottom. 7. Chisel out a 2 mm recess for the strike plate along the marked lines, then drill a hole 25.4 mm in diameter, and 26 mm in depth (enough for the locking bolt). E12914_DL101_UM_V3.
Installing your ASUS DL101 NOTE: The installation steps shown in this manual are for a lefthanded door and for reference only. 1. Insert the strike plate into the door frame, then secure it with the bundled short screws. 2. Insert the deadbolt into the door, then secure it with the bundled short screws. E12914_DL101_UM_V3.
3. Insert the blade on the ASUS DL101 exterior unit horizontally into the cross shaped opening on the deadbolt, then pass the cable through the opening on top of the deadbolt. WARNING! Ensure the blade on the ASUS DL101 exterior unit is horizontally inserted (see red circle area). E12914_DL101_UM_V3.
4. Align the mounting plate and install it, then secure the mounting plate with the bundled long screws. NOTE: Ensure to pass the blade through the blade opening, and pass the cable through the cable opening and place it on the right side (see red circle area). E12914_DL101_UM_V3.
5. Insert a flat head screwdriver into the opening with the tip pointing slightly upwards, then gently tilt the screwdriver upwards (as shown below) to release the cover. E12914_DL101_UM_V3.
6. Connect the cable of the exterior unit to the interior unit, then align the interior unit and install it. NOTE: • Ensure to connect the cable in the correct orientation (black to black and red to red), and placed at (A) as shown below • Ensure the blade is horizontally aligned with the thumbturn lever as shown in (B) below. • Ensure that the thumbturn lever is in the open position. Turn the thumbturn lever to make sure the lever turns the blade. E12914_DL101_UM_V3.
7. Secure the interior unit with the bundled screws, then install four 1.5V AA batteries and the cover. NOTE: Ensure the batteries are installed in the correct polarity. E12914_DL101_UM_V3.
Setting lock direction Enter master password (default: 0000) then press Press <0> then press NOTE: Set the lock direction after your ASUS DL101 is installed. When the ASUS DL101 is unlocked, touch the panel, then press to enter programming mode. This setting must be set up after installing the ASUS DL101 for the first time, and ensure the thumbturn lever is installed correctly.
Unlocking with a key Insert your key into the keyhole Turn the key Unlocking with a password Touch the panel Enter the random code 1 2 3 4 5 6 7 8 9 Enter user password OK 0 Press NOTE: The two digit random code helps you spread fingerprint across all the numbers, this is part of the fingerprint security mechanism.
Unlocking with the companion app Launch the ASUS Smart Home companion app Navigate to the ASUS DL101 device Move the slider to Unlock NOTE: The companion app will show that the status of the ASUS DL101 is Locked after locking. To unlock the ASUS DL101, move the slider to Unlock. E12914_DL101_UM_V3.
Locking the ASUS DL101 1 2 3 Locking with a key 4 Insert your key into the keyhole 5 Turn the6key 7 with8 the touch 9 panel Locking OK Touch the panel E12914_DL101_UM_V3.
Locking with the companion app Launch the ASUS Smart Home companion app Navigate to the ASUS DL101 device Move the slider to Lock NOTE: The companion app will show that the status of the ASUS DL101 is Unlocked after unlocking. To lock the ASUS DL101, move the slider to Lock. E12914_DL101_UM_V3.
Locking automatically You can set the ASUS DL101 to automatically lock after it is closed for thirty (30) seconds. Enter master password (default: 0000) then press Press <8> then press NOTE: This feature is disabled by default and is only available after enabling it. When this feature is enabled, the ASUS DL101 automatically locks after it is closed for thirty (30) seconds. To disable this feature, repeat these steps again.
Setting a new master password Enter old master password (default: 0000) then press Enter new master password (four to eight digits) then press Press <1> then press NOTE: The master password is for programming the ASUS DL101 only and cannot be used to unlock.
Setting a new NFC-enabled android phone Enter master password (default: 0000) then press Touch the panel with your phone then press Press <2> then press Panel will show the slot number this phone occupies then press NOTE: • NFC function on Android smartphones vary per manufacturer, download the ASUS Smart Key the Google Play Store app from to help set up your smart phone with the ASUS DL101 and complete the NFC settings.
Deleting an user card or NFC phone Enter master password (default: 0000) then press Enter the slot number you want to delete then press Press <3> then press Deleting all user passwords, cards and NFC phones Enter master password (default: 0000) then press Press <4> then press Setting an one time password (OTP) Enter master password (default: 0000) then press Enter OTP password (four to eight digits) then press Press <5> then press NOTE: • You can only have one
Setting an emergency password Enter master password (default: 0000) then press Enter emergency password (four to eight digits) then press Press <6> then press NOTE: • You can only have one emergency password at a time. • The emergency password cannot be the same as the user password or the one time password. • The emergency password can be used repeatedly, you can change the emergency password if needed. This feature can only be used with the ASUS HG100.
Disabling the ASUS DL101 temporarily Enter master password (default: 0000) then press Press <7> then press NOTE: When you disable the ASUS DL101, the ASUS DL101 can only be unlocked by using the key or the companion app. Disabling the electronic functions Lock the ASUS DL101, then remove the key halfway out of the keyhole, then turn the key left or right and press for about two (2) seconds.
Enabling/Disabling keypad sound Enter master password (default: 0000) then press Press <9> then press Restoring to factory settings 1. 2. Locate the Reset button on your device. Press and hold the Reset button for at about five (5) seconds until two beeps go off. Low battery warning • When you receive a low battery warning, please replace four AA alkaline batteries immediately.
• • Your settings will not change or be erased when your battery completely dies. You can still use a key to lock or unlock when the battery completely dies. Connecting to the ASUS Smart Home 1. 2. 3. Remove the cover on the interior unit. Launch the ASUS Smart Home companion app. Navigate to the Add Device screen (as shown below) on your companion app, then tap Add Device. 4. Locate the LED indicator on the interior unit of your ASUS DL101, then press it until it blinks blue. E12914_DL101_UM_V3.
5. Tap Done once the ASUS DL101 has been added, then follow the onscreen instructions to complete (refer to the user manual of your ASUS Smart Home for more details). NOTE: Ensure that your device is within 45 meters of your ASUS HG 100, and there are no obstructions such as thick solid walls or other electronic devices that may cause interference. E12914_DL101_UM_V3.
Troubleshooting 1. After installing and inserting batteries for the first time, pressing does not lock the door. (short beep) Problem: The lock direction is not set up yet. Resolution: Ensure to set the lock direction first after your ASUS DL101 is installed. 2. After installing and inserting batteries for the first time, there is no response when I press any key. (no beep and no panel light) Problem: The batteries are faulty or the cable is not in the correct orientation.
4. I can set the lock direction when setting up for the first time, but the door would not lock. (motor turns slowly, lockbolt stuck, thumbturn lever jammed) Problem: The batteries are low. Resolution: Replace the batteries. 5. I can lock the door using a key, but I cannot unlock the door when I enter my password. 1 2 3 (long beep) Problem: The deadbolt is skew, or the lockbolt is misaligned 1 plate.
Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Canada, Industry Canada (IC) Notices This device complies with Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d’Industry Canada (IC) Cet appareil est conforme avec Industrie Canada exemptes de licence RSS standard(s).
Regional notice for California WARNING! This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.
Română ASUSTeK Computer Inc. declară că acest dispozitiv se conformează cerinţelor esenţiale şi altor prevederi relevante ale directivelor conexe. Textul complet al declaraţiei de conformitate a Uniunii Europene se găseşte la: www.asus.com/support Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti sa osnovnim zahtevima i drugim relevantnim odredbama povezanih Direktiva. Pun tekst EU deklaracije o usaglašenosti je dostupan da adresi: www.asus.
E12914_DL101_UM_V3.indd 41 5/24/2017 18:00:13 The center of the cross bore hole will vary per thickness of the door. Cross bore hole Ø25.4 mm (1”) Fold along this line and align it to the corner edge of the door.
Fold along this line and align it to the corner edge of the door. Lockbolt length 60 mm (2-3/8”) Drilling template (60 mm lockbolt) Cross bore hole Ø25.4 mm (1”) The center of the cross bore hole will vary per thickness of the door. Bore hole Ø54 mm (2-1/8”) 5/24/2017 18:00:13 E12914_DL101_UM_V3.