E-Manual
Appendix
153
For Model P021
CE Mark Warning
0682
CE marking for devices with wireless LAN/Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and
recognition of conformity.
The highest CE SAR value for the device is 0.718 W/Kg.
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general
public to electromagnetic elds by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientic organizations
through regular and thorough evaluations of scientic studies. The unit of measurement for the
European Council’s recommended limit for mobile devices is the “Specic Absorption Rate” (SAR),
and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of
the International Commission on Non-Ionizing Radiation Protection (ICNIRP).
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines
and the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a
separation of 1.0 cm to the body while transmitting at the highest certied output power level in all
frequency bands of the mobile device.
A minimum separation distance of 1.0 cm must be maintained between the user’s body and
the device, including the antenna during body-worn operation to comply with the RF exposure
requirements in Europe.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
For France, headphones/earphones for this device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-1:2000 and/or EN 50332-2:2003 standard
required by French Article L.5232-1.