User Manual

ADAM Connected Web Console (For ISV)
21
Device manager
Add new device
Before a device can be managed with ADAM Connected Web Console,
it must rst be added into the system. You can add devices manually, or
upload a .csv le for batch import.
To add devices manually:
1. Click Add new device from the menu tab.
2. Select a customer account to import the device.
3. Check License Validity, then select a license from the available
list.
NOTE:
• IfyoudidnotchecktheLicense Validity checkbox, the available list
of licenses will not show.
• Ifyoudidnotassignalicenseatthisstep,youcanstillassignalicense
at a later stage. Refer to the Bind the license to the device section for
more details.
4. Enter the device information into the corresponding elds.
5. Click
to add device information for more devices.
6. Repeat steps 4 and 5 for other devices, then click SUBMIT to
complete.