User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Monitor standing positions
- 2.2 Adjusting the monitor
- 2.3 Connecting the cables
- 2.4 Turning on the monitor
- 2.5 Performing wireless projection
- 2.6 Connecting the monitor to the Internet
- 2.7 Updating wireless projection firmware
- 2.8 Announcements
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
2-4 Chapter 2: Setup
2.6 Connecting the monitor to the
Internet
1. Turn on the monitor and make sure that the signal source is "Wireless".
2. Connecting MB16AWP in the Wi-Fi settings on your device (make sure both
of your device and the monitor are in the same subnetwork).
3. Open your web browser and go to the address of the monitor (192.168.203.1).
SECS
2
http://192.168.203.1
192.168.203.1
4. Select a WiFi network that you want to join
.
5. Enter the password if asked.