Quick Start Guide

7
1.3 Your wireless router
ASUS ZenWiFi AX Hybrid Overview
WPS/PLC combo button
Press this button to start WPS or PLC pairing.
WPS pairing: Press the buttons on XP4 and a new wireless client to establish
WiFi connection.
PLC pairing: Press the buttons on XP4 in the existing Mesh System and a new
XP4 device. After a short time, the new XP4 device will be integrated into your
existing Mesh System.
AC power connector
Connect your router and node to wall sockets using the bundled power cords.
Reset button
This button resets or restores the system to its factory default settings.
LAN ports
Connect network cables into these ports to establish LAN connection.
WAN port
Connect a network cable into this port to establish WAN connection.
If you use XP4 as an AiMesh node, you can connect a network cable from a
LAN port of an AiMesh router to its WAN port for uplink connection of Ethernet
backhaul.
USB 3.1 Gen1 port
Insert a USB 3.1 Gen 1/ USB 2.0 device such as a USB disk or USB 3G/4G modem
into this port.
If you use XP4 as an AiMesh node, the USB port supports function of AiDisk
and macOS backup.