Quick Start Guide

ASUS ZenWiFi XD5
AX3000 Dual Band WiFi Router
Model: XD5
Quick
Start Guide
1
Plug the adapter into the DCIN port.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
XD5 Overview
Before Setup
ASUS Router App
AiMesh Setup Steps
Troubleshooting
1
Find three ZenWiFi XD5, and power them on.
2
Use a network cable to connect your modem to the WAN port of one ZenWiFi XD5. This ZenWiFi XD5 will
be the AiMesh router, and the other two ZenWiFi XD5 will be the AiMesh nodes.
3
The LED turns solid blue to indicate that ZenWiFi XD5 is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh Setup Steps
Download free ASUS Router APP to set up
and manage your router(s).
Prepare
01
Place your ZenWiFi XD5 router and nodes within 3 meters of
each other during the setup process.
AiMesh node
02
Keep your AiMesh nodes powered on and standby for AiMesh
system settings.
Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Launching ASUS Router APP
03
If your AiMesh router cannot find any AiMesh nodes nearby or
synchronization fails, please check the following and try again.
a
Move your AiMesh nodes closer to the AiMesh router ideally. Ensure that it is within 3 meters.
b
Your AiMesh nodes are powered on.
DC Power adapter DC Output: +12V with max 1.5A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
LAN port
DCIN port
WAN/LAN port
within
3 meters
within
3 meters
WAN/LAN port
Connect your modem to this port
with a network cable.
LAN port
Connect your PC to a LAN port with
a network cable.
AiMesh node
AiMesh node AiMesh router
AiMesh node AiMesh node AiMesh router