User’s Manual

Using the onboard display output ports
Connect your monitor to the onboard display output port.
To connect an external monitor using the onboard display output ports:
1. Connect a VGA monitor to the VGA port or a DVI-D monitor to the DVI-D port on the rear
panel of your computer.
2. Plug the monitor to a power source.
D540MA
D540MB
D540MC
• IfyourcomputercomeswithanASUSGraphicsCard,thegraphicscardissetastheprimary
display device in the BIOS. Hence, connect your monitor to a display output port on the
graphics card.
• Toconnectmultipleexternalmonitorstoyourcomputer,refertoConnecting multiple
external display in Chapter 2 of this guide for details.
D540SA
DVI
30 Chapter 1: Getting started
ENGLISH
ENGLISH