User’s Manual

SD/MMC/MS
Smart Card
SD/MMC/MS
Using the memory card reader (Optional)
Digital cameras and other digital imaging devices
use memory cards to store digital picture or media
les. The built-in memory card reader on the front
panel of your system allows you to read from and
write to dierent memory card drives.
To use the memory card:
1. Insert the memory card into the card slot.
• Amemorycardiskeyedsothatittsinonlyonedirection.DONOTforceacardintoaslotto
avoid damaging the card.
• Youcanplacemediainoneormoreofthecardslotsanduseeachmediaindependently.Place
only one memory card in a slot at one time.
2. Select a program from the AutoPlay window to access your les.
• IfAutoPlayisNOTenabledinyourcomputer,clickFile Explorer from the Start menu, and
then double-click the memory card icon to access the data on it.
• EachcardslothasitsowndriveiconwhichisdisplayedontheFileExplorerscreen.
3. When nished, right-click the memory card drive icon on the Computer screen, click Eject,
and then remove the card.
Never remove cards while or immediately after reading, copying, formatting, or deleting data on
the card or else data loss may occur.
To prevent data loss, use “Safely Remove Hardware and Eject Media” in the Windows® notication
area before removing the memory card.
36 Chapter 3: Using your computer
ENGLISH
ENGLISH