Grafikkort Drivrutiner och verktyg Programvarureferens
SW1728 Första utgåvan V1 2005 Copyright © 2005 ASUSTeK COMPUTER INC. Alla rättigheter förbehållna. Ingen del av denna manual, inklusive produkterna och mjukvaran som beskrivs i den, får reproduceras, överföras, kopieras, lagras i ett system för hämtning av information, eller översättas till något språk i någon form eller på något sätt, bortsett från den dokumentation som sparas av köparen för säkerhetskopiering, utan särskilt skriftligt tillstånd från ASUSTeK COMPUTER INC. ("ASUS").
Innehåll Meddelanden ....................................................................................... iv Säkerhetsinformation ........................................................................... v Om denna guide .................................................................................. vi 1. Information om support-CD ..................................................... 1 2. VGA-drivrutiner ....................................................................... 2 3. 4. 2.
Meddelanden Federal Communications Commission Statement Denna utrustning motsvarar del 15 i FCCs regelverk. Drift av datorn får ske på följande två villkor: • Denna utrustning får inte orsaka skadliga störningar, och • Denna utrustning måste acceptera all mottagen störning som kan orsaka oönskad drift. Utrustningen har testats och motsvarar kraven för digital utrustning i klass B enligt del 15 i FCCs regelverk.
Säkerhetsinformation Elsäkerhet • Då annan utrustning tillsätts eller avlägsnas från systemet, se till att strömkablarna till utrustningen är urkopplade innan signalkablarna ansluts. Om möjligt, koppla ur alla strömkablar från det existerande systemet innan du ansluter en ny enhet. • Se till att din elförsörjning är inställt på korrekt spänning för ditt område. Om du inte är säker på spänningen i det elektriska uttag du använder, kontakta ditt lokala elbolag.
Om denna guide Symboler som används i denna guide För att se till att du utför vissa uppgifter korrekt, skall du notera följande symboler som används i manualen. VARNING: Information för att undvika att skada dig då du utför en uppgift. FÖRSIKTIGT: Information för att undvika att komponenterna skadas du utför en uppgift. VIKTIGT: Information som du MÅSTE följa då du utför en uppgift. ANMÄRKNING: Tips och ytterligare information för utförande av en uppgift.
1. Information om support-CD Support-CD-skivan som medföljer VGA-kortet innehåller användbar programvara och åtskilliga verktygsdrivrutiner som förbättrar videofunktionerna. • Skärmbilderna i denna bruksanvisning motsvarar eventuellt inte exakt det som visas på din skärm. • Vissa drivrutins- och verktygsposter på support-CD-skivan gäller endast specifika ASUS VGA-kortmodeller. • Du måste kanske ha administratörsrättigheter för att installera drivrutinerna och verktygsprogrammen.
2. VGA-drivrutiner En VGA-drivrutin är den programvara som gör att enheten kan fungera tillsammans med ditt operativsystem. Du kan installera, uppdatera eller ta bort grafikkortets bildskärmsdrivrutin med någon av metoderna som rekommenderas i detta avsnitt. Om du byter ut ett gammalt grafikkort mot ett nytt ASUS-grafikkort, var noga med att ta bort den gamla bildskärmsdrivrutinen från ditt system. Se avsnitt “2.3 Ta bort bildskärmsdrivrutiner” för detaljer.
5. Klicka på n ä s t a på installationsguidens välkomstskärm. 6. Välj t y p i s k och klicka sedan på n ä s t aa. Guiden kopierar de nödvändiga filerna till datorn. En förloppsindikator ner till höger på skärmen visar hur drivrutinsinstallationen fortlöper. 7. Följande skärm visar installation av Microsoft® DirectX™. Välj I a g a c c e p t e r a r a v t a l e t och ja klicka sedan på n ä s t aa.
8. Klicka på n ä s t a för att fortsätta eller klicka på b a k å t för gå tillbaka till föregående skärm eller klicka på a v b r y t för att avbryta installationen. Installationsprogrammet för Microsoft® DirectX™installerar komponenter. 9. Installationsprogrammet för Microsoft® DirectX™ uppmanar dig att starta om datorn för att ändringarna ska börja gälla. Klicka på s l u t f ö rr. ASUS VGA:s installationsprogram startar om datorn när alla komponenter har installerats.
10. På ASUS VGARTD:s skärm för drivrutinsinstallation, välj j a , installera VGARTD-drivrutin och klicka sedan på O K K. 11. Följ anvisningarna på skärmen för att installera lämplig VGARTD-drivrutin för moderkortets chipset. De sista uppgifterna i installationsprocessen visas på förloppsindikatorn. 12. När installationen är klar väljer du j a , n u och klickar sedan på s l u t f ö rr.
Metod 2: Egen installation Med metoden för egen installation kan du själv välja de komponenter du vill installera. Vi rekommenderar denna metod för avancerade användare. 1. I dialogrutan g u i d e n n y m a s k i n v a r aa, klicka på a v b r y t för att öppna Windows skrivbord. 2. Sätt i support-CD-skivan i CDROM-enheten. 3. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.exe från rotkatalogen på support-CDskivan.
6. Välj e g e n och klicka sedan på n ä s t aa. 7. Klicka i kryssrutan invid den post du vill installera och klicka sedan på n ä s t aa. Drivrutin A T I - installerar lämplig ATI-d rivrutin för ditt grafikkort. A S U S - installerar ASUS utökade drivrutiner som stöder medföljande ASUSverktygsprogram, klusive ASUS GameFace Live! och SmartDoctor. Dessa utökade drivrutiner stöder även lägena Direct3D™ och OpenGL™. D i r e c t X - installerar de senaste Microsoft® DirectX™ körtidsbiblioteken.
Installationsprocessen för ASUS utökade bildskärmsdrivrutiner visas bara om du valde ASUSdrivrutiner på skärmen för egen installation. 8. Följande skärm visar installationsprogrammet för Microsoft® DirectX™. Välj I j a g a c c e p t e r a r a v t a l e t och klicka sedan på n ä s t aa. Installationsprocessen för DirectX™ visas bara om du valde DirectX™ på skärmen för egen installation. 9.
10. Installationsprogrammet för Microsoft® DirectX™ uppmanar dig att starta om datorn för att ändringarna ska börja gälla. Klicka på s l u t f ö rr. ASUS VGA:s installationsprogram startar om datorn när alla komponenter har installerats. Följande skärm visar installationsprocessen för WDMdrivrutiner (Windows Display Model). 11. På ASUS VGARTD:s skärm för drivrutinsinstallation, välj j a , installera VGARTDd r i v r u t i n och klicka sedan på OK. 12.
De sista uppgifterna i installationsprocessen visas på förloppsindikatorn. 13. När installationen är klar väljer du j a , n u och klickar sedan på s l u t f ö rr.
2.2 Uppdatera Windows® bildskärmsdrivrutin Den senaste bildskärmsdrivrutinen för ditt ASUS-grafikkort finns tillgänglig på ASUS webbplats (www.asus.com). Gå till ASUS webbplats för att ladda ner drivrutinsuppdateringar. Så här uppdaterar du Windows® bildskärmsdrivrutin: 1. Starta datorn. 2. Klicka på knappen Start. Välj i n s t ä l l n i n g a r och därefter kontrollpanelen n. 3. Dubbelklicka på ikonen System i kontrollpanelen. Välj fliken m a s k i n v a r aa.
6. I dialogrutan e g e n s k a p e r väljer du fliken d r i v r u t i n och klickar sedan på u p p d a t e r a drivrutin n. 7. ag väljer Välj s ö k i n t e e. I will ja vilken drivrutin som ska i n s t a l l e r a s och klicka sedan på n ä s t aa. 8. Klicka på d i s k e t t f i n n s på följande skärm och klicka därefter på n ä s t aa. 9.
2.3 Ta bort bildskärmsdrivrutin Om du vill byta ut din bildskärmsdrivrutin eller om du inte längre behöver bildskärmsdrivrutinen för ditt kort, följ procedurerna i detta avsnitt för att helt ta bort bildskärmsdrivrutinen från systemet. Så här tar du bort bildskärmsdrivrutiner: 1. 2. 3. 4. 5. Klicka först på Start och därefter på k o n t r o l l p a n e l e n n. I kontrollpanelen dubbelklickar du på ikonen l ä g g t i l l / t a b o r t p r o g r a m för att visa skärmen lägg till/ta bort program m.
3. Verktygsprogram Ditt grafikkortspaket åtföljs av innovativa teknologier som förvandlar din dator till ett smart multimediecenter. Du kan installera eller ta bort dessa verktygsprogram med hjälp av någon av de metoder som rekommenderas i detta avsnitt. När du har installerat VGA-drivrutiner för ditt grafikkort, använd en av följande rekommenderade metoder för att installera något av följande verktygsprogram: A.
3.1 Installation av verktygsprogram Så här installerar du verktygsprogram: Metod 1: Fullständig installation Den fullständiga installationsmetoden installerar alla tillgängliga programfunktioner. Vi rekommenderar denna metod för de flesta användare. 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör S e t u p . e x e från rotkatalogen på support-CDskivan. 3.
6. Installationsprogrammet visar målkatalog för verktygsprogrammen. Klicka på n ä s t aa. 7. När installationen är klar klickar du på s l u t f ö rr. Metod 2: Egen installation Med metoden för egen installation kan du själv välja de funktioner du vill installera. Vi rekommenderar denna metod för avancerade användare. 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt.
4. Klicka på n ä s t a på installationsguidens välkomstskärm. 5. Välj e g e n och klicka sedan på n ä s t aa. 6. Klicka i kryssrutan invid det verktygsprogram du vill installera och klicka sedan på n ä s t aa. 7. Installationsprogrammet visar målkatalog för de valda verktygsprogrammen. Klicka på n ä s t aa.
8. 3.2 När installationen är klar klickar du på s l u t f ö rr. Ta bort installerade verktygsprogram Om du vill ta bort något av de installerade vrktygsprogrammen, följ procedurerna i detta avsnitt för att helt ta bort verktygsprogrammen från systemet. Så här tar du bort verktygsprogram: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.
5. Klicka i kryssrutan invid det verktygsprogram du vill ta bort och klicka sedan på n ä s t aa. 6. Klicka på j a för att starta om datorn så att ändringarna börjar gälla.
4. Drivrutiner till tillbehör Du kan installera ytterligare tillbehör som t ex en webbkamera eller spelkonsol som utökar datorns multimediefunktioner. Du kan installera eller ta bort drivrutiner för något av följande tillbehör: 4.1 Installera drivrutin till webbkamera Så här installerar du VGA-drivrutinen: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.
5. Klicka på n ä s t a på nästa skärm. Installationsprogrammet visar installationsförloppet. Klicka på a v b r y t om du vill avbryta installationen. 6. När installationen är klar klickar du på s l u t f ö rr. Nu kan du använda din webbkamera.
4.2 Installera drivrutiner till spelkonsol Så här installerar du drivrutiner till spelkonsol: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.exe från rotkatalogen på support-CDskivan. 3. 4. 5. 22 På huvudmenyn 2D/3D Graphics & Video Accelerator klickar du på d r i v r u t i n e rr. Installationsprogrammet visar de tillbehör som stöds.
Installationsprogrammet förbereder filerna för installation. 6. När installationen är klar klickar du på s l u t f ö rr. Nu kan du använda din spelkonsol.
4.3 Ta bort drivrutin till webbkamera Så här tar du bort webbkameradrivrutiner: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.exe från rotkatalogen på support-CDskivan. 3. 4. 5. 24 På huvudmenyn 2D/3D Graphics & Video Accelerator klickar du på d r i v r u t i n e rr. Installationsprogrammet visar de tillbehör som stöds.
4.4 Ta bort drivrutiner till spelkonsol Så här tar du bort spelkonsolsdrivrutiner: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör S e t u p . e x e från rotkatalogen på support-CDskivan. 3. 4. På huvudmenyn 2D/3D Graphics & Video A c c e l e r a t o r k l i c k a r d u p å d r i v r u t i n e rr. Installationsprogrammet visar de tillbehör som stöds.
5. ASUS Kontaktinformation Så här visar du ASUS kontaktinformation: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.exe från rotkatalogen på support-CD-skivan. 3. På huvudmenyn 2D/3D Graphics & Video Accelerator klickar du på A S U S kontaktinformation n. Installationsprogrammet visar en textruta med kontaktinformationen för alla ASUS regionala kontor världen över. 4.
6. Övrig information 6.1 Bläddra i support-CD-skiva TSå här bläddrar du i support-CD-skivan: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.exe från rotkatalogen på support-CDskivan. 3. På huvudmenyn 2D/3D Graphics & Video Accelerator klickar du på B l ä d d r a i C D D. Installationsprogrammet visar följande fönster.
6.2 Visa readme-filen Så här visar du readme-filen: 1. Sätt i support-CD-skivan i CDROM-enheten. 2. Om automatisk start är aktiverad, visas 2D/3D Graphics & Video Accelerator automatiskt. Om automatisk start är inaktiverad, kör Setup.exe från rotkatalogen på support-CDskivan. 3. På huvudmenyn 2D/3D Graphics & Video Accelerator klickar du på l ä s d e t t aa. Installationsprogrammet visar följande fönster.
Bilaga: Grundläggande felsökning Om du stöter på något av följande problem efter det att du installerat ditt grafikkort, pröva någon av följande lösningar innan du kontaktar teknisk support. Problem Ingen bild efter installation av kort. Orsak Kortet kan vara fel installerat. Lösning Kontrollera att kortet inte sitter snett eller fel. Orsak Bildskärmen kan vara fel ansluten. Lösning Kontrollera att signalsladden är rätt ansluten till bildskärm och grafikkort.
A-2 Problem Fel färgbalans. Orsak Kortet kan vara fel installerat. Lösning Kontrollera att kortet inte sitter snett eller fel. Orsak Videokontrollerna kan vara felinställda. Lösning • Konfigurera dina videokontroller manuellt till önskade inställningar. • Konfigurera grafikkortets bildskärmsuppplösning (t ex ändra bildskärmsegenskaper). Orsak Det kan finnas en grafikkortsdrivrutin som inte stöds i systemet. Det kan uppstå konflikter med grafikkortsdrivrutiner från andra tillverkare.
Problem Skärmbilden är förvrängd. Orsak Din bildskärm stöder inte önskade bildskärmsinställningar. Lösning Kontrollera att din bildskärm har stöd för önskade bildskärmsinställningar. Se den tekniska dokumentation som medföljde din bildskärm. Orsak Ditt grafikkort stöder inte önskade systeminställningar. Lösning Kontrollera att ditt grafikkort har stöd för önskade bildskärmsinställningar. Se specifikationstabellen som medföljde ditt grafikkortspaket. Orsak Vissa drivrutinsfiler kan vara skadade.
A-4 Grafikkort i ASUS ATI-serien