User's Manual

USB Single Port Control
The subitems in this menu allow you to set the USB Port Disable Override features.
USB3_1~4, USB7~10, USB3_C5 [Enabled]
Allows you to enable or disable the USB ports individually. Conguration options:
[Disabled] [Enabled]
Refer to section 1.2.3 Motherboard layout for the location of the USB ports.
2.6.7 Onboard Devices Conguration
HD Audio Controller [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high‑denition audio depending on the audio standard that the front panel audio
module supports.
[HD] Sets the front panel audio connector (AAFP) mode to high denition
audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97.
DVI Port Audio [Disabled]
Conguration options: [Enabled] [Disabled]
Depop [Enabled]
Conguration options: [Enabled] [Disabled]
SupremeFX LED Lighting [Breathing Mode]
Allows you to set the behavior of the audio LED. Conguration options: [Disabled] [Still Mode]
[Breathing Mode]
RGB LED (onboard) [Enabled]
Allows you to set the behavior of the RGB LED. Conguration options: [Disabled] [Enabled]
Wi-Fi Controller [Enabled]
This item allows you to enable or disable the Wi‑Fi controller.
Conguration options: [Enabled] [Disabled]
This item is available on selected models.
2‑28 Chapter 2: BIOS Setup