Installation Guide

Windows
®
7 and USB 3.0 driver installation for 100 Series and Braswell platform
1
Method 1: Using SATA ODD & USB devices
Load USB 3.0 drivers using the ASUS support DVD and install Windows
®
7 using a USB device.
1. Insert the Windows
®
7 installation DVD into a USB ODD, or copy all les on the Windows
®
7
installation DVD to a USB storage device on a working system.
2. Connect the USB ODD or USB storage device to your 100 series and Braswell platform.
3. Insert the ASUS support DVD into a SATA ODD on your 100 series and Braswell platform.
4. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot
screen.
5. Select the USB ODD or USB storage device as the boot device.
Windows
®
7 and USB 3.0 driver installation for 100 Series and
Braswell platform
Based on the chipset specication, the 100 series and Braswell platform require USB 3.0 drivers to
be preloaded in order to use USB keyboard/mouse during Windows
®
7 installation. This section is a
guide on preloading USB 3.0 drivers and installing Windows
®
7.
DE164
Second Edition
August 2015
Requirement:
1 x ASUS support DVD
1 x Windows
®
7 installation source
1 x SATA ODD
1 x USB device (ODD or storage)
The USB storage device requires 8 GB or more capacity. It is recommended to format the
storage device before use.
If you want to install Windows
®
7 64-bit UEFI mode, use both a USB ODD and a SATA ODD.
DE164_100_Series_Windows_7_Setup_Guide.indd 1 2015/8/7 14:35:26

Summary of content (6 pages)