Installation Guide

Windows
®
7 and USB 3.0 driver installation for 100 Series and Braswell platform
4
- Select the source of the Windows
®
7 installation disk then click Next.
- Select the USB storage device and click next.
Click the refresh icon if the USB storage device is not displayed.
- Click Yes to clear the contents on the USB storage device and create a bootable
USB device.
Make sure to backup contents on the USB storage device, as it will be formatted.
- Once completed, click OK to nish.
- Check I agree and then click Next.
DE164_100_Series_Windows_7_Setup_Guide.indd 4 2015/8/7 14:35:26